STM32withRF

Prab-khnl·STM32withRF_PCB_design·STM32PCBdesign/STM32.kicad_pcb

STM32withRF PCB layout, top view — open source STM32 board by Prab-khnl

About the STM32withRF PCB

STM32withRF is an open source STM32 PCB design by Prab-khnl, published on GitHub. It is a 4-layer board measuring 61 × 32 mm, with 40 components from 21 distinct parts.

Its main chip is the STM32WB55CEU6, from the STM32 family. Other key parts include the MIC5365-3.3YC5-TR and USBLC6-2SC6. By type, the board carries 19 capacitors, 7 resistors, 3 ICs, 3 connectors, 3 inductors and 2 crystals.

From the project

Use STM32CubeIDE to get more information about the Chip :-

Use STM32CubeIDE to get more information about the Chip :-

In Kicad, import the board STM32WB55CEUX.

As illustrated on the reference manual, the Pin VDDUSB, VDDA, VDD, VDD, VDD and VBAT are connected to 3.3V power supply through bigger capacitor (4.67uF) and smaller capacitors (100nF : local supply).

For VDDRF, connect it to 100nF capacitor along with power supply

STM32withRF, from the project README
From the project README

Main components on the STM32withRF

STM32withRF bill of materials (BOM)

40 components, 21 distinct parts.

QtyPartRefs
1
MIC5365-3.3YC5-TR
MIC5365-3.3YD5
Microchip
U1
1
USBLC6-2SC6
STMicroelectronics
U2
1
STM32WB55CEU6
STMicroelectronics
U3
1
NX2012SA-32.768K-STD-MUB-1
32kHz768
NDK
X1
1
NX2016SA-32M-EXS00A-CS06465
32MHz
NDK
X2
1
USB4105-GF-A
USB_C_Receptacle_USB2.0_16P
GCT
J1
1
53048-0410
Conn_01x04
MOLEX
J2
1
U.FL-R-SMT(01)
Conn_Coaxial
Hirose
J4
1
DLF162500LT-5028A1
TDK
FLT1
1
RS282G05A3SMRT
SW_Push
C&K
SW1
1
150040RS73240
LED
Wurth Elektronik
D1
1
LQG15HS18NJ02D
10n
Murata
L1
1
LQM21FN100M70L
10u
Murata
L2
1
LQG15HS2N7S02D
2n7
Murata
L3
5
0603YD475MAT2A
4u7
KYOCERA AVX
C1, C2, C3, C10, C14
10
04023C104KAT2A
100n
KYOCERA AVX
C4, C5, C6, C7, C8, C9, C11, C12 +2
1
GRM1555C1HR80BA01D
0p8
MURATA
C15
1
GRM1555C1HR30WA01D
0p3
MURATA
C16
2
04025A100JAT4A
10p
KYOCERA AVX
C17, C18
3
RC0603FR-075K1L
5k1
Yageo
R1, R2, R6
Show 1 more
QtyPartRefs
4
RC0402FR-07221RL
220R
Yageo
R3, R4, R5, R7

STM32withRF design files

The KiCad project lives in the Prab-khnl/STM32withRF_PCB_design repository on GitHub; these links point at the commit this page was built from.

STM32withRF: common questions

What microcontroller does the STM32withRF use?

The STM32withRF is built around the STM32WB55CEU6, from the STM32 family.

How big is the STM32withRF PCB?

The STM32withRF measures 61 × 32 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the STM32withRF?

40 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32withRF design files?

From the Prab-khnl/STM32withRF_PCB_design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32withRF design in my own project?

The repository has no license, so all rights stay with Prab-khnl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32withRF without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards