INDRBT

pratham-cloud-ctrl·INDRBT·04_Electronics/joint_interface.kicad_pcb

INDRBT PCB layout, top view — open source board by pratham-cloud-ctrl

About the INDRBT PCB

INDRBT is an open source PCB design by pratham-cloud-ctrl, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 100 mm, with 44 components from 22 distinct parts.

Other key parts include the AP2112K-3.3 and LTC2850IS8. By type, the board carries 16 resistors, 10 diodes, 7 connectors, 7 capacitors, 2 ICs and 1 fuse.

It belongs with the robotics & motion designs in this gallery.

From the project

INDRBT: an original six-axis digital robot arm and gripper, with interactive CAD/PCB inspection, theory and reproducible engineering files.

Inspect the interactive PCB · Rotate the 3D board · Zoom the schematic

Search components, cross-highlight the BOM, follow connected nets and inspect the actual board without installing KiCad.

Start with the illustrated circuit and PCB tour. Follow the regulated supply, encoder/limit inputs, external-drive commands and RS-485 interface, then match each block to the schematic and board.

INDRBT, from the project README
From the project README

Main components on the INDRBT

INDRBT bill of materials (BOM)

44 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U1
1
LTC2850IS8
U2
1
5V INPUT
J1
1
MCU 3V3 I/O
J2
1
ENCODER 3V3
J3
1
NC LIMIT
J4
1
3V3 DRIVE I/O
J5
1
RS485 BUS
J6
1
E-STOP AUX NC
J7
1
MF-NSMF025X-2
F1
1
END TERM
JP1
1
SS14
D1
1
GREEN
D2
8
BAT54H
D3, D4, D5, D6, D7, D8, D9, D10
1
10uF / 10V
C1
1
4.7uF / 10V
C2
3
100pF / 50V
C3, C4, C5
2
100nF / 50V
C6, C7
5
1k
R1, R2, R3, R4, R5
5
10K
10k
R6, R7, R8, R12, R13
Show 2 more
QtyPartRefs
5
330
R9, R10, R11, R14, R15
1
120
R16

INDRBT design files

The KiCad project lives in the pratham-cloud-ctrl/INDRBT repository on GitHub; these links point at the commit this page was built from.

INDRBT: common questions

How big is the INDRBT PCB?

The INDRBT measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the INDRBT?

44 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the INDRBT design files?

From the pratham-cloud-ctrl/INDRBT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the INDRBT design in my own project?

Yes, under the terms of its MIT license, which pratham-cloud-ctrl chose for the repository.

Similar boards