RelayBreakout
About the RelayBreakout PCB
RelayBreakout is an open source PCB design by profdc9, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 121 components from 8 distinct parts.
By type, the board carries 36 capacitors, 32 inductors, 21 connectors, 16 diodes and 16 resistors.
It belongs with the rf & radio designs in this gallery.
From the project
A Modular Antenna Tuner for a Phased Array Antenna System
This a project to create a Modular Antenna Tuner System that can be reconfigured for different needs. This material is copyrighted by Daniel Marks (KW4TI) and licensed under the Creative Commons License CC-BY-SA 4.0.
This project is a toolkit for making automatic antenna tuners and smart HF antennas.
A description and documentation of this project may be found in the "doc" directory as ModularTuner-Guide.pdf.
RelayBreakout bill of materials (BOM)
121 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Conn_01x01 | 1pin | J1, J2, J3, J4 |
| 1 | Conn_02x16_Odd_Even | Pin_Header_Straight_2x16_Pitch2.54mm | J5 |
| 16 | Conn_01x02 | TerminalBlock_bornier-2_P5.08mm | J6, J7, J8, J9, J10, J11, J12, J13 +8 |
| 16 | LED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 32 | 100 uH | L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 | L1, L2, L3, L4, L5, L6, L7, L8 +24 |
| 4 | 100 nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4 |
| 32 | 10 nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C5, C6, C7, C8, C9, C10, C11, C12 +24 |
| 16 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +8 |
RelayBreakout design files
The KiCad project lives in the profdc9/ModularTuner repository on GitHub; these links point at the commit this page was built from.
RelayBreakout: common questions
How big is the RelayBreakout PCB?
The RelayBreakout measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RelayBreakout?
121 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the RelayBreakout design files?
From the profdc9/ModularTuner repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RelayBreakout design in my own project?
The repository has no license, so all rights stay with profdc9. Use it as a reference, and ask the author before reusing the design.
More boards in ModularTuner
Controller
100 × 100 mm180 parts2LNo license59
RelayControl
100 × 100 mm180 parts2LNo license59
QROMatch
200 × 100 mm166 parts2LNo license59
OptoisolatedRelay
100 × 100 mm126 parts2LNo license59
TunerSection
100 × 100 mm123 parts2LNo license59
LittleDelayLine
100 × 100 mm117 parts2LNo license59
QuadCoupler
100 × 100 mm116 parts2LNo license59
LittleSwitchBus
100 × 100 mm101 parts2LNo license59
DelayLine
100 × 100 mm90 parts2LNo license59
Filter
100 × 100 mm81 parts2LNo license59
SwitchBus
100 × 100 mm80 parts2LNo license59
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372