Drawer robot
pronvis·drawer-robot·companion_pcb/companion_pcb.kicad_pcb
About the Drawer robot PCB
Drawer robot is an open source PCB design by pronvis, published on GitHub. It is a 2-layer board measuring 77 × 37.5 mm, with 1 components from 1 distinct parts.
It belongs with the robotics & motion designs in this gallery.
From the project
Based on https://github.com/knurling-rs/app-template
Based on https://github.com/knurling-rs/app-template
Good Vref calculator: https://wiki.fysetc.com/TMC2208/#motor-current-setting For my steppers (1.7A for phase) Vref should be 1.6970562748477143, but I set it to 1.9, cause my friend told me that active cooling required above Vref=1.4
To connect PS3 controller to HC-05 you need to set master address. To do that: - install SixAxisPairTool (for mac get it from here) - connect PS3 to PC - set master address
Drawer robot bill of materials (BOM)
1 components, 1 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PinHeader_1x04_P2.54mm_Vertical | PinHeader_1x04_P2.54mm_Vertical | HC-05 |
Drawer robot design files
The KiCad project lives in the pronvis/drawer-robot repository on GitHub; these links point at the commit this page was built from.
Drawer robot: common questions
How big is the Drawer robot PCB?
The Drawer robot measures 77 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Drawer robot?
1 components, from 1 distinct parts. The full bill of materials is listed on this page.
Where can I download the Drawer robot design files?
From the pronvis/drawer-robot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Drawer robot design in my own project?
The repository has no license, so all rights stay with pronvis. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979