HardLabs

Mynd Batt

Prototype-Fund-Hardware·MYND-Hardware·PCB_Schematic/KiCad/Conn_Bat/Mynd_Batt.kicad_pcb

Mynd Batt PCB layout, top view — open source board by Prototype-Fund-Hardware

About the Mynd Batt PCB

Mynd Batt is an open source PCB design by Prototype-Fund-Hardware, published on GitHub. It is a 2-layer board measuring 41 × 21 mm, with 14 components from 7 distinct parts.

By type, the board carries 6 test points, 2 connectors and 2 microphones.

From the project

Inofficial hardware repository for the Teufel MYND loudspeaker: https://teufel.de/mynd-107002004

Due to the file size, the STL files were not uploaded. They can be downloaded directly from the Teufel website: https://docs.teufel.de/download/MYND/open_source.zip

The repository for the firmware can be found here: https://github.com/teufelaudio/mynd-firmware

Mynd Batt bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
8P PITCH=2.5mm
P1T
1
WT250MW-084R-0W
P2T
2
SCREW_HOLE
MH1T, MH2T
2
MARK
MK1T, MK2T
6
TP12
TP1T, TP2T, TP3T, TP4T, TP5T, TP6T
1
3.1
Teufel_ASM_Label1T
1
2023
Teufel_Copyright1T

Mynd Batt design files

The KiCad project lives in the Prototype-Fund-Hardware/MYND-Hardware repository on GitHub; these links point at the commit this page was built from.

Mynd Batt: common questions

How big is the Mynd Batt PCB?

The Mynd Batt measures 41 × 21 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mynd Batt?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mynd Batt design files?

From the Prototype-Fund-Hardware/MYND-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mynd Batt design in my own project?

The repository has no license, so all rights stay with Prototype-Fund-Hardware. Use it as a reference, and ask the author before reusing the design.

More boards in MYND-Hardware