HardLabs

Mynd AMP

Prototype-Fund-Hardware·MYND-Hardware·PCB_Schematic/KiCad/Amp/Mynd_AMP.kicad_pcb

Mynd AMP PCB layout, top view — open source board by Prototype-Fund-Hardware

About the Mynd AMP PCB

Mynd AMP is an open source PCB design by Prototype-Fund-Hardware, published on GitHub. It is a 2-layer board measuring 90.5 × 57.5 mm, with 158 components from 38 distinct parts.

Other key parts include the TAS5825PRHBR and TAS5805MPWPR. By type, the board carries 71 capacitors, 38 resistors, 24 test points, 12 inductors, 2 ICs and 2 connectors.

From the project

Inofficial hardware repository for the Teufel MYND loudspeaker: https://teufel.de/mynd-107002004

Due to the file size, the STL files were not uploaded. They can be downloaded directly from the Teufel website: https://docs.teufel.de/download/MYND/open_source.zip

The repository for the firmware can be found here: https://github.com/teufelaudio/mynd-firmware

Main components on the Mynd AMP

TAS5825PRHBRTAS5805MPWPR

Mynd AMP bill of materials (BOM)

158 components, 38 distinct parts.

QtyPartRefs
1
TAS5825PRHBR
U1A
1
TAS5805MPWPR
U2A
1
2 x 5P 2.54mm
P2A
1
2 x 12P 2.54mm
P3A
4
SCREW_HOLE_D32
MH1A, MH2A, MH3A, MH4A
2
MARK
MK_T1A, MK_T2A
2
TP_T_60_40
TP1A, TP2A
22
TP12
TP3A, TP4A, TP5A, TP6A, TP7A, TP8A, TP9A, TP10A +14
1
=Comment/Name
Teufel_ASM_Label1A
1
=Comment/Name
Teufel_Copyright1A
1
=Comment/Name
Teufel_PCB_Label1A
2
600R
FB1A, FB4A
4
56R
FB2A, FB3A, FB5A, FB6A
2
4.7uH
L1A, L2A
4
10uH
L3A, L4A, L5A, L6A
4
Generic
470nF
C1A, C9A, C10A, C15A
6
Generic
330pF
C2A, C13A, C32A, C43A, C51A, C62A
6
Generic
10nF
C3A, C14A, C33A, C44A, C52A, C63A
2
Generic
680nF
C4A, C11A
14
Generic
1nF
C5A, C12A, C35A, C39A, C54A, C61A, C64A, C65A +6
Show 18 more
QtyPartRefs
10
Generic
100nF
C6A, C7A, C19A, C23A, C26A, C29A, C30A, C42A +2
2
Generic
22uF
C8A, C31A
2
Generic
470uF
C16A, C20A
8
Generic
10uF
C17A, C18A, C21A, C22A, C40A, C41A, C47A, C48A
5
Generic
1uF
C24A, C27A, C28A, C55A, C59A
2
Generic
4.7uF
C25A, C56A
4
Generic
330nF
C34A, C38A, C53A, C60A
4
Generic
220nF
C36A, C45A, C50A, C58A
2
Generic
220uF
C37A, C46A
5
Generic
10R
R1A, R2A, R13A, R31A, R32A
11
Generic
0R
R3A, R5A, R8A, R9A, R12A, R14A, R23A, R25A +3
2
Generic
2.2R
R4A, R17A
6
Generic
10R
R6A, R10A, R19A, R22A, R29A, R33A
6
Generic
3.3R
R7A, R11A, R20A, R24A, R30A, R34A
1
Generic
100k
R15A
5
Generic
10k
R16A, R18A, R21A, R37A, R38A
1
Generic
4.7k
R35A
1
Generic
NC
R39A

Mynd AMP design files

The KiCad project lives in the Prototype-Fund-Hardware/MYND-Hardware repository on GitHub; these links point at the commit this page was built from.

Mynd AMP: common questions

How big is the Mynd AMP PCB?

The Mynd AMP measures 90.5 × 57.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mynd AMP?

158 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mynd AMP design files?

From the Prototype-Fund-Hardware/MYND-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mynd AMP design in my own project?

The repository has no license, so all rights stay with Prototype-Fund-Hardware. Use it as a reference, and ask the author before reusing the design.

More boards in MYND-Hardware