STM32F103CBT6-custom dev board
pushtiujeniya·STM32F103CBT6-custom-dev-board
About the STM32F103CBT6-custom dev board
STM32F103CBT6-custom dev board is an open source STM32 PCB design by pushtiujeniya, published on GitHub. It is a 2-layer board measuring 36.4 × 24.3 mm, with 29 components from 17 distinct parts.
Its main chip is the STM32F103CBT6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 14 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Custom STM32F103C8 development board designed in kicad 9.0, featuring micro USB connector, I2C interface, UART interface and SWD programming interface . Built with proper schematic diagram and layout (2 layer pcb) practices , power integrity, USB pair differential routing.
This project contains custom development board based on the STM32F103 microcontroller.This baord created using kicad 9.0 software with proper routing , signal integrity, differential pair routing of USB connection.
Main components on the STM32F103CBT6-custom dev board
STM32F103CBT6-custom dev board bill of materials (BOM)
29 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103CBT6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | red led | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 1 | 10uF | C_0603_1608Metric | C1 |
| 5 | 0.1uF | C_0402_1005Metric | C2, C3, C4, C5, C6 |
| 1 | 10nF | C_0402_1005Metric | C7 |
| 2 | 1uF | C_0402_1005Metric | C8, C9 |
| 1 | 100nF | C_0402_1005Metric | C10 |
| 2 | 10pF | C_0402_1005Metric | C11, C12 |
| 2 | 22uF | C_0805_2012Metric | C13, C14 |
| 1 | 10kohm | R_0402_1005Metric | R1 |
| 4 | 1K5 | R_0402_1005Metric | R2, R3, R4, R5 |
STM32F103CBT6-custom dev board design files
The KiCad project lives in the pushtiujeniya/STM32F103CBT6-custom-dev-board repository on GitHub; these links point at the commit this page was built from.
- LayoutSTM32F10_dev board.kicad_pcb
- SchematicSTM32F10_dev board.kicad_sch
STM32F103CBT6-custom dev board: common questions
What microcontroller does the STM32F103CBT6-custom dev board use?
The STM32F103CBT6-custom dev board is built around the STM32F103CBT6, from the STM32 family.
How big is the STM32F103CBT6-custom dev board?
The STM32F103CBT6-custom dev board measures 36.4 × 24.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F103CBT6-custom dev board?
29 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F103CBT6-custom dev board design files?
From the pushtiujeniya/STM32F103CBT6-custom-dev-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32F103CBT6-custom dev board design in my own project?
The repository has no license, so all rights stay with pushtiujeniya. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F103CBT6-custom dev board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k