PUTM EV SteeringWheel 2021
PUT-Motorsport·PUTM_EV_SteeringWheel_2021·Steering_Wheel_Electronics/Kierownica.kicad_pcb
About the PUTM EV SteeringWheel 2021 PCB
PUTM EV SteeringWheel 2021 is an open source STM32 PCB design by PUT-Motorsport, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 92 × 92 mm, with 69 components from 32 distinct parts.
Its main chip is the STM32L4P5RET6, from the STM32 family. Other key parts include the MCP2562-H-SN and LM1117-3.3. By type, the board carries 32 resistors, 19 capacitors, 5 connectors, 4 switches, 3 ICs and 3 diodes.
From the project
Embedded system with buttons and encoders to change vehicle setup
Main components on the PUTM EV SteeringWheel 2021
PUTM EV SteeringWheel 2021 bill of materials (BOM)
69 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L4P5RET6 | STM32L4P5RET6 | U1 |
| 1 | MCP2562-H-SN | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LM1117-3.3 | SOT-223 | U3 |
| 1 | 16MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | Conn_01x04_Male | TerminalBlock_bornier-4_P5.08mm | J1 |
| 3 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J2, J3, J5 |
| 1 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Fuse | Fuse_2010_5025Metric | F1 |
| 3 | SR17A1815F89N | SR17A1815F89N | S1, S2, S3 |
| 1 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | D_TVS_x2_AAC | SOT-23 | D1 |
| 1 | D_Schottky | D_SMB | D2 |
| 1 | 5V | D_SMB | D3 |
| 1 | 10uH | L_0805_2012Metric | L1 |
| 2 | 20pF | C_1206_3216Metric | C1, C2 |
| 3 | 1uF | C_1206_3216Metric | C3, C16, C19 |
| 1 | 10nF | C_1206_3216Metric | C4 |
| 1 | 4,7uF | C_1206_3216Metric | C5 |
| 11 | 100nF | C_1206_3216Metric | C6, C7, C8, C9, C10, C11, C13, C14 +3 |
| 1 | 0.1uF | C_1206_3216Metric | C12 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 2k2 | R_1206_3216Metric | R1, R2, R3 |
| 3 | 910R | R_1206_3216Metric | R4, R5, R6 |
| 3 | 510R | R_1206_3216Metric | R7, R8, R9 |
| 3 | 330R | R_1206_3216Metric | R10, R11, R12 |
| 3 | 220R | R_1206_3216Metric | R13, R14, R16 |
| 2 | 100k | R_1206_3216Metric | R15, R32 |
| 3 | 170R | R_1206_3216Metric | R17, R18, R19 |
| 3 | 100R | R_1206_3216Metric | R20, R21, R22 |
| 3 | 1k | R_1206_3216Metric | R23, R24, R25 |
| 2 | 10k | R_1206_3216Metric | R26, R27 |
| 1 | 120R | R_1206_3216Metric | R28 |
| 3 | 11k | R_1206_3216Metric | R29, R30, R31 |
PUTM EV SteeringWheel 2021 design files
The KiCad project lives in the PUT-Motorsport/PUTM_EV_SteeringWheel_2021 repository on GitHub; these links point at the commit this page was built from.
PUTM EV SteeringWheel 2021: common questions
What microcontroller does the PUTM EV SteeringWheel 2021 use?
The PUTM EV SteeringWheel 2021 is built around the STM32L4P5RET6, from the STM32 family.
How big is the PUTM EV SteeringWheel 2021 PCB?
The PUTM EV SteeringWheel 2021 measures 92 × 92 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PUTM EV SteeringWheel 2021?
69 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the PUTM EV SteeringWheel 2021 design files?
From the PUT-Motorsport/PUTM_EV_SteeringWheel_2021 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PUTM EV SteeringWheel 2021 design in my own project?
Yes, under the terms of its Apache-2.0 license, which PUT-Motorsport chose for the repository.
Can I test firmware for the PUTM EV SteeringWheel 2021 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k