5 open source boards using the STM32L4P5RET6
Real designs built with the STM32L4P5RET6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
PUTM EV SMART FUSES 2022
PUT-Motorsport
166.4 × 60 mm169 parts4LNo license0STM32
PUTM DV EBS 2022
PUT-Motorsport
97.9 × 67.4 mm121 parts2LNo license0STM32
PUTM EV SteeringWheel 2021
PUT-Motorsport
92 × 92 mm69 parts2LApache-2.00STM32
Rc helicopter mainboard
ikajdan
50 × 50 mm49 parts2LCERN-OHL-P-2.00STM32
Rc helicopter remote
ikajdan
100 × 50 mm43 parts2LCERN-OHL-P-2.00
How designs wire the STM32L4P5RET6
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32L4P5RET6 connects to, and the resistors, capacitors and other passives placed on it.
- The PH0-OSC_IN pin has a crystal on 5 of 5 designs, most often 16 MHz.
- The PH1-OSC_OUT pin has a crystal on 5 of 5 designs, most often 16 MHz.
- The PC14-OSC32_IN pin is left unconnected on 5 of 5 designs.
- The PC15-OSC32_OUT pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 60% · not connected 20% · a signal 20% |
|
| PC13pin 2 | Connected to: Not connected 80% · a signal 20% | — |
| PC14-OSC32_INpin 3 | Connected to: Not connected 100% | — |
| PC15-OSC32_OUTpin 4 | Connected to: Not connected 100% | — |
| PH0-OSC_INpin 5 | Connected to: Signal 100% |
|
| PH1-OSC_OUTpin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: A connector 100% |
|
| PC1pin 9 | Connected to: Not connected 60% · a signal 40% | — |
| PC2pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| PC3pin 11 | Connected to: Not connected 80% · a signal 20% | — |
| VSSA/VREF-pin 12 | Connected to: GND 80% · a signal 20% | — |
| VDDA/VREF+pin 13 | Connected to: Signal 60% · 3.3V 40% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 80% · a signal 20% | — |
| VDDpin 19, 32, 64 | Connected to: 3.3V 80% · a signal 20% |
|
| PA5pin 21 | Connected to: Signal 80% · not connected 20% |
|
| PA6pin 22 | Connected to: Signal 80% · not connected 20% |
|
| PA7pin 23 | Connected to: Signal 80% · not connected 20% |
|
| PB0pin 26 | Connected to: Not connected 60% · a signal 40% | — |
| PB1pin 27 | Connected to: Signal 60% · not connected 40% |
|
| PB2pin 28 | Connected to: Signal 60% · not connected 40% |
|
| PB10pin 29 | Connected to: Not connected 80% · a signal 20% | — |
| PB11pin 30 | Connected to: Not connected 100% | — |
| PB12pin 33 | Connected to: Not connected 60% · a signal 40% | — |
| PB13pin 34 | Connected to: Not connected 60% · a signal 40% | — |
| PB14pin 35 | Connected to: Not connected 80% · a signal 20% | — |
| PB15pin 36 | Connected to: Not connected 80% · a signal 20% | — |
| PC6pin 37 | Connected to: Not connected 80% · a signal 20% | — |
| PC7pin 38 | Connected to: Not connected 80% · a signal 20% | — |
| PC8pin 39 | Connected to: Not connected 60% · a signal 40% | — |
| PC9pin 40 | Connected to: Not connected 60% · a signal 40% | — |
| PA8pin 41 | Connected to: Not connected 100% | — |
| PA9pin 42 | Connected to: Not connected 80% · a signal 20% | — |
| PA10pin 43 | Connected to: Not connected 80% · a signal 20% | — |
| PA11pin 44 | Connected to: Not connected 60% · a signal 40% | — |
| VDDUSBpin 48 | Connected to: 3.3V 80% · a signal 20% |
|
| PA15pin 50 | Connected to: Not connected 60% · a signal 40% | — |
| PC10pin 51 | Connected to: Not connected 60% · a signal 40% | — |
| PC11pin 52 | Connected to: Not connected 60% · a signal 40% | — |
| PC12pin 53 | Connected to: Not connected 60% · a signal 40% | — |
| PD2pin 54 | Connected to: Not connected 60% · a signal 40% | — |
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rc helicopter mainboard by ikajdan, Rc helicopter remote by ikajdan, PUTM DV EBS 2022 by PUT-Motorsport and PUTM EV SMART FUSES 2022 by PUT-Motorsport.
The STM32L4P5RET6 in open source designs
The gallery holds 5 open source boards using the STM32L4P5RET6 from 5 GitHub repositories; a typical one measures about 97.9 × 60 mm and carries around 69 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is PUTM EV SMART FUSES 2022 by PUT-Motorsport.
Parts used alongside the STM32L4P5RET6
Microcontrollers on boards using the STM32L4P5RET6
What boards using the STM32L4P5RET6 are built for
STM32L4P5RET6: common questions
Where can I find a STM32L4P5RET6 reference design?
Each of the 5 boards on this page is a real design using the STM32L4P5RET6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32L4P5RET6 PH0-OSC_IN pin connected?
The PH0-OSC_IN pin has a crystal on 5 of 5 designs, most often 16 MHz. Counted from the KiCad layouts of 5 open source designs using the STM32L4P5RET6.
How is the STM32L4P5RET6 PH1-OSC_OUT pin connected?
The PH1-OSC_OUT pin has a crystal on 5 of 5 designs, most often 16 MHz. Counted from the KiCad layouts of 5 open source designs using the STM32L4P5RET6.
How is the STM32L4P5RET6 PC14-OSC32_IN pin connected?
The PC14-OSC32_IN pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the STM32L4P5RET6.
What parts are used alongside the STM32L4P5RET6?
The LM1117-3.3, LM2596S-5, MCP2562-H-SN and NRF24L01_Breakout appear in the most repositories here.
Which microcontrollers do boards using the STM32L4P5RET6 use?
Most are built on STM32 (5).
How big is a typical board using the STM32L4P5RET6?
The median is 97.9 × 60 mm, and 80% are two-layer designs.
What is the most popular open source board using the STM32L4P5RET6?
By GitHub stars, PUTM EV SMART FUSES 2022 by PUT-Motorsport, with 0 stars.
Can I simulate one of these boards using the STM32L4P5RET6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.