Inputkatze
q3k·inputkatze·kicad/designs/sdi-devboard/sdi-devboard.kicad_pcb
About the Inputkatze PCB
Inputkatze is an open source PCB design by q3k, published on GitHub. It is a 2-layer board measuring 61.2 × 49.2 mm, with 44 components from 19 distinct parts.
Other key parts include the LMH0307. By type, the board carries 19 resistors, 14 capacitors, 5 connectors, 2 diodes, 2 inductors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
magic hdmi2sdi device
Main components on the Inputkatze
Inputkatze bill of materials (BOM)
44 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMH0307 | WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias | U1 |
| 1 | BSS138 | SOT-23 | Q1 |
| 1 | SDI_IP | SMA_Molex_73251-1153_EdgeMount_Horizontal | J1 |
| 1 | SDI_IN | SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | CTRL | PinHeader_2x09_P2.54mm_Vertical | J3 |
| 1 | SDI_O0 | molex-bnc-73171-1640 | J4 |
| 1 | SDI_O1 | molex-bnc-73171-1640 | J5 |
| 1 | ~FAULT | LED_0603_1608Metric | D1 |
| 1 | PWR | LED_0603_1608Metric | D2 |
| 2 | 6.2nH | L_0603_1608Metric | L1, L2 |
| 7 | 4.7uF, tant | CP_EIA-1608-08_AVX-J | C1, C3, C4, C9, C10, C13, C14 |
| 3 | 100nF | C_0603_1608Metric | C2, C7, C8 |
| 2 | 10nF | C_0603_1608Metric | C5, C6 |
| 2 | 0.25pF | C_0603_1608Metric | C11, C12 |
| 2 | 49.9, 1% | R_0603_1608Metric | R1, R2 |
| 2 | 120 | R_0603_1608Metric | R3, R5 |
| 6 | 4.7k | R_0603_1608Metric | R4, R6, R7, R9, R18, R19 |
| 1 | 750 1% | R_0603_1608Metric | R8 |
| 8 | 75 | R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16, R17 |
Inputkatze design files
The KiCad project lives in the q3k/inputkatze repository on GitHub; these links point at the commit this page was built from.
Inputkatze: common questions
How big is the Inputkatze PCB?
The Inputkatze measures 61.2 × 49.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Inputkatze?
44 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Inputkatze design files?
From the q3k/inputkatze repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Inputkatze design in my own project?
The repository has no license, so all rights stay with q3k. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979