GPS Antenna Board
About the GPS Antenna Board
GPS Antenna Board is an open source PCB design by Queens-Rocket-Engineering-Team, published on GitHub. It is a 2-layer board measuring 50 × 65 mm, with 14 components from 13 distinct parts.
Other key parts include the SAM-M10Q. By type, the board carries 5 capacitors, 4 resistors, 3 diodes, 1 IC and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
ECAD for SRAD Avionics hardware
Brief description of the board, its purpose, and its role within the [System Name] system.
- Part: - Architecture: - Clock: - Memory:
Description of the subsytem and its function.
Description of the substeym and its function.
[Circuit] - Description, supporting calculations, snippet of circuit.
Status: [Development / Review / Shipped / Assembly / Testing / Validated / ]
Main components on the GPS Antenna Board
GPS Antenna Board bill of materials (BOM)
14 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAM-M10Q | ublox_SAM-M8Q_HandSolder | U1 |
| 1 | GT8E-6P-2H(55) | CONN_GT8E-6P-2H(55) | J1 |
| 1 | White | LED_0805_2012Metric | D1 |
| 1 | Green | LED_0805_2012Metric | D2 |
| 1 | 1N5819WS | D_SOD-323_HandSoldering | D3 |
| 2 | 100nF | C_0603_1608Metric | C1, C2 |
| 1 | 1uF | C_0603_1608Metric | C3 |
| 1 | 330mF | CB5R5334HF-ZJP | C4 |
| 1 | 47uF | C_0805_2012Metric | C5 |
| 1 | 10k | R_0603_1608Metric | R1 |
| 1 | 2.2k | R_0603_1608Metric | R4 |
| 1 | 3.3k | R_0603_1608Metric | R5 |
| 1 | 100R | R_0603_1608Metric | R6 |
GPS Antenna Board design files
The KiCad project lives in the Queens-Rocket-Engineering-Team/av-hardware repository on GitHub; these links point at the commit this page was built from.
GPS Antenna Board: common questions
How big is the GPS Antenna Board?
The GPS Antenna Board measures 50 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GPS Antenna Board?
14 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the GPS Antenna Board design files?
From the Queens-Rocket-Engineering-Team/av-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GPS Antenna Board design in my own project?
The repository has no license, so all rights stay with Queens-Rocket-Engineering-Team. Use it as a reference, and ask the author before reusing the design.
More boards in av-hardware
STM32QRET 25-26 SRAD Hybrid Lower Control Module
69.5 × 60 mm140 parts4LNo license1
STM32QRET 25-26 SRAD Hybrid Power Module
69.5 × 62.6 mm125 parts4LNo license1
ESP32Kuhglocke GS
65 × 70 mm115 parts2LNo license1
ESP32Handheld GS
65 × 70 mm99 parts2LNo license1
ESP32QRET 25-26 SRAD Hybrid Upper Control Module
69.5 × 62.6 mm99 parts4LNo license1
STM32QRET 23-24 SRAD Altimeter Module
69.5 × 62.6 mm92 parts4LNo license1
STM32QRET 23-24 SRAD Communications Module
69.5 × 62.6 mm69 parts4LNo license1
STM32GPS Module
69.5 × 62.6 mm61 parts4LNo license1
ScrewSwitch
56 × 74 mm16 parts2LNo license1
Backplane
69.5 × 98.5 mm8 parts2LNo license1
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372