Esp32 s3 lvgl test

quserunknownpΒ·esp32_s3_lvgl_testΒ·hardware/pcb/ev_dashboard.kicad_pcb

Esp32 s3 lvgl test PCB layout, top view β€” open source board by quserunknownp

About the Esp32 s3 lvgl test PCB

Esp32 s3 lvgl test is an open source PCB design by quserunknownp, published on GitHub under the Custom license license. It is a 2-layer board measuring 70.3 Γ— 75.9 mm, with 6 components from 4 distinct parts.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

πŸ“ housingstep/: Contains 3D CAD models (.step) and 2D dimensional drawings (.pdf) for the dashboard's physical enclosure and mounting brackets. πŸ“ pcb/`**: Contains the KiCad project files and manufacturing production data (Gerbers, BOM, Pick and Place) for the custom dashboard ca

πŸ“ housingstep/: Contains 3D CAD models (.step) and 2D dimensional drawings (.pdf) for the dashboard's physical enclosure and mounting brackets. πŸ“ pcb/`**: Contains the KiCad project files and manufacturing production data (Gerbers, BOM, Pick and Place) for the custom dashboard carrier board.

Esp32 s3 lvgl test bill of materials (BOM)

6 components, 4 distinct parts β€” part numbers from the project's BOM.

QtyPartRefs
1
FC-05D40P11H20
Conn_01x40_Socket
J1
2
CONN_01X22_PIN
Conn_01x22_Pin
J2, J3
2
CONN_01X02_PIN
Conn_01x02_Pin
J5, J7
1
CONN_01X06_SOCKET
Conn_01x06_Socket
J6

Esp32 s3 lvgl test design files

The KiCad project lives in the quserunknownp/esp32_s3_lvgl_test repository on GitHub; these links point at the commit this page was built from.

Esp32 s3 lvgl test: common questions

How big is the Esp32 s3 lvgl test PCB?

The Esp32 s3 lvgl test measures 70.3 Γ— 75.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32 s3 lvgl test?

6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32 s3 lvgl test design files?

From the quserunknownp/esp32_s3_lvgl_test repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32 s3 lvgl test design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Similar boards