OS-41
radio-satellites·OS-41_PCB
About the OS-41 PCB
OS-41 is an open source STM32 PCB design by radio-satellites, published on GitHub. It is a 4-layer board measuring 32.5 × 61 mm, with 66 components from 41 distinct parts.
Its main chip is the STM32F411CEUX, from the STM32 family. Other key parts include the BME280, SI4432-B1-FMR, MCP1640X-XCHY and ATGM336H-5N31. By type, the board carries 27 capacitors, 13 resistors, 8 inductors, 5 ICs, 5 connectors and 3 crystals.
From the project
Hardware for the OS-41 radiosondes
Main components on the OS-41
OS-41 bill of materials (BOM)
66 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | SI4432-B1-FMR | QFN50P400X400X90-21N | U2 |
| 1 | MCP1640X-XCHY MCP1640x-xCHY | SOT-23-6 | U3 |
| 1 | ATGM336H-5N31 | GPSM-SMD_ATGM336H-TR | U4 |
| 1 | STM32F411CEUX STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U7 |
| 1 | CRYSTAL_GND24 32.768KHz 12.5pF | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 8MHz 12pF | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | CRYSTAL_GND24 30MHz 10pF | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | Conn_02x03_Counter_Clockwise | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J4 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | 1575AT43A0040 | ANT_1575AT_JOT | AE2 |
| 1 | SW_Push | SMD_SW_NEW_REDONE | SW4 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 1 | 270NH 270nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 11NH 11nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 2 | 24NH 24nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3, L5 |
| 1 | 39NH 39nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L4 |
| 1 | 4.7UH 4.7uH | IND-SMD_L3.3-W3.0 | L6 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 3.9 nH | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L8, L9 |
| 1 | 12PF 12pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 8.2PF 8.2pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 9.1PF 9.1pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 3 | 10UF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C11, C28 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 120PF 120pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 5 | 100NF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C9, C12, C14, C27 |
| 2 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C13 |
| 1 | 22UF 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 1.5PF 1.5pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C29 |
| 2 | 15pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32, C33 |
| 2 | 14pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C36, C37 |
| 1 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C43 |
| 5 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C44, C45, C46, C47, C48 |
| 1 | 50R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R9 |
| 1 | 976K 976k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 562K 562k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 4 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R13, R14, R18 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11, R12 |
OS-41 design files
The KiCad project lives in the radio-satellites/OS-41_PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutOS-41.kicad_pcb
- SchematicOS-41.kicad_sch
- BOMjlcpcb/production_files/BOM-OS-41.csv
OS-41: common questions
What microcontroller does the OS-41 use?
The OS-41 is built around the STM32F411CEUX, from the STM32 family.
How big is the OS-41 PCB?
The OS-41 measures 32.5 × 61 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the OS-41?
66 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OS-41 design files?
From the radio-satellites/OS-41_PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OS-41 design in my own project?
The repository has no license, so all rights stay with radio-satellites. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OS-41 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k