DPS5015--Nextion
About the DPS5015--Nextion PCB
DPS5015--Nextion is an open source AVR/Arduino PCB design by radioelf, published on GitHub. It is a 2-layer board measuring 38.1 × 53.9 mm, with 17 components from 9 distinct parts.
Its main chip is the Arduino_Nano, from the AVR/Arduino family. Other key parts include the 74HC126. By type, the board carries 9 resistors, 4 capacitors, 1 IC, 1 module, 1 transistor and 1 buzzer.
It belongs with the wearables designs in this gallery.
From the project
Control 2 DPS5015 con pantalla Nextion y arduino nano
Codigos para el control de dos fuentes DPS5015 a través de una pantalla nextion.
https://www.youtube.com/watch?v=COuCyDTJvEc
UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS…
Main components on the DPS5015--Nextion
DPS5015--Nextion bill of materials (BOM)
17 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC126 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Arduino_Nano | Arduino_Nano | A1 |
| 1 | Q_PNP | SOT-23 | Q1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 3 | 10nF | C_0603_1608Metric | C1, C2, C3 |
| 1 | 100nF | C_0603_1608Metric | C4 |
| 5 | 10K | R_0603_1608Metric | R1, R2, R3, R5, R6 |
| 3 | 330R | R_0603_1608Metric | R4, R8, R9 |
| 1 | 1K | R_0603_1608Metric | R7 |
DPS5015--Nextion design files
The KiCad project lives in the radioelf/DPS5015--Nextion repository on GitHub; these links point at the commit this page was built from.
DPS5015--Nextion: common questions
What microcontroller does the DPS5015--Nextion use?
The DPS5015--Nextion is built around the Arduino_Nano, from the AVR/Arduino family.
How big is the DPS5015--Nextion PCB?
The DPS5015--Nextion measures 38.1 × 53.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DPS5015--Nextion?
17 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the DPS5015--Nextion design files?
From the radioelf/DPS5015--Nextion repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DPS5015--Nextion design in my own project?
The repository has no license, so all rights stay with radioelf. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DPS5015--Nextion without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746