Gps ocxo
radiolok·gps_ocxo·hw/mcu_eth_gnss/mcu_eth_gnss.net
About the Gps ocxo PCB
Gps ocxo is an open source PCB design by radiolok, published on GitHub under the BSD-2-Clause license. It is a board, with 93 components from 40 distinct parts.
By type, the board carries 34 resistors, 32 capacitors, 7 ICs, 4 inductors, 2 crystals and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
GPS disciplined OCXO
Целевая архитектура описана в ARCHITECTURE.md. Здесь — что где лежит.
Схемы и платы — в DipTrace. Для каждой новой платы — свой каталог с исходниками, нетлистом и, по мере появления, Gerber, BOM и PDF схемы.
Картинки в img/ сгенерированы скриптом img/makediagrams.py`. Чтобы поправить схему, правьте скрипт и перезапустите его:
legacy/ хранит платы прошлых версий. В новую архитектуру они не входят и оставлены для истории.
Gps ocxo bill of materials (BOM)
93 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | QFP48P50_900X900X120L60X22N | U1 |
| 1 | — | QFP100P50_1600X1600X160L60X22N_AD8 | U2 |
| 1 | — | UBLOX_ZED-f9T-00B_N | U4 |
| 1 | — | SON9P80_400X400X100L40X30T206X224N | U5 |
| 1 | — | SOT23-3P65_210X110L20X32N | U6 |
| 1 | — | SOP10P50_290X400X90L29X22N | U9 |
| 1 | — | SOT23-5P95_280X145L45X42N | U10 |
| 1 | — | SHDRRA20W41P127_10X2_1588X559H584_AP1 | X1 |
| 1 | — | HDRRA20W66P254_10X2_2499X175H617 | X2 |
| 1 | +20-24V | CUI_PJ-002A | J3 |
| 1 | — | UFL | 25MHz |
| 1 | — | SEIKO_MS621FE-FL11E | B1 |
| 1 | TPS73033DBV | SOT23-5 | DA1 |
| 1 | RJ45 | POE-RJ45 | Eth1 |
| 4 | — | SOD380X200X290L30X50N_WHT | HL1, HL2, HL3, HL4 |
| 1 | — | 1734086-2 | USB-B1 |
| 2 | SM6T6V6A | SMB | VD1, VD2 |
| 2 | — | SOT23-6 | VD3, VD6 |
| 4 | — | IND_0805_N | L1, L2, L3, L5 |
| 18 | 0.1uF | CAP_0603_N | C1, C2, C3, C4, C6, C7, C8, C9 +10 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1500pF | CAP-5.08/4x2.5 | C5 |
| 2 | 2.2uF | CAP_0603_N | C19, C20 |
| 2 | — | CAP_0603_N | C21, C22 |
| 1 | 1uF | CAP_0805_N | C23 |
| 1 | 100nF NP0 | CAP_0603_N | C24 |
| 1 | 22uF 16V X5R | CAP_1210 | C26 |
| 1 | 22pF | CAP_0603_N | C27 |
| 2 | 220nF NP0 | CAP_0603_N | C28, C29 |
| 3 | 1uF | CAP_0603_N | C30, C31, C32 |
| 8 | 49.9 | RES_0603_N | R1, R2, R3, R4, R5, R6, R11, R15 |
| 3 | 4.87k | RES_0603_N | R7, R8, R9 |
| 4 | 0 | RES_0603_N | R10, R17, R18, R29 |
| 1 | 10 | RES_0603_N | R12 |
| 2 | 27 | RES_0603_N | R13, R14 |
| 4 | 10k | RES_0603_N | R16, R21, R26, R27 |
| 3 | NI | RES_0603_N | R19, R30, R34 |
| 2 | 1k | RES_0603_N | R20, R25 |
| 5 | 50 | RES_0603_N | R22, R23, R31, R32, R33 |
| 1 | 2k | RES_0603_N | R24 |
| 1 | 500 | RES_0603_N | R28 |
Gps ocxo design files
The KiCad project lives in the radiolok/gps_ocxo repository on GitHub; these links point at the commit this page was built from.
Gps ocxo: common questions
How many components are on the Gps ocxo?
93 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gps ocxo design files?
From the radiolok/gps_ocxo repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Gps ocxo design in my own project?
Yes, under the terms of its BSD-2-Clause license, which radiolok chose for the repository.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568