HardLabs

Pcb design

rahulnarayanan-s·pcb_design

Pcb design layout, top view — open source AVR/Arduino board by rahulnarayanan-s

About the Pcb design

Pcb design is an open source AVR/Arduino PCB design by rahulnarayanan-s, published on GitHub. It is a 4-layer board measuring 75.8 × 49.4 mm, with 14 components from 7 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the MAX30102 and SSD1306. By type, the board carries 4 resistors, 3 switches, 3 capacitors, 2 ICs, 1 module and 1 diode.

Main components on the Pcb design

MAX30102SSD1306Arduino_Nano_v3.x

Pcb design bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
MAX30102
U1
1
SSD1306
U2
1
Arduino_Nano_v3.x
A1
3
SW_Push
SW1, SW2, SW3
1
LED
D1
3
100n
C1, C2, C3
4
1k
R1, R2, R3, R4

Pcb design design files

The KiCad project lives in the rahulnarayanan-s/pcb_design repository on GitHub; these links point at the commit this page was built from.

Pcb design: common questions

What microcontroller does the Pcb design use?

The Pcb design is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Pcb design?

The Pcb design measures 75.8 × 49.4 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the Pcb design?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb design design files?

From the rahulnarayanan-s/pcb_design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb design design in my own project?

The repository has no license, so all rights stay with rahulnarayanan-s. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pcb design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards