Pipar flake
About the Pipar flake PCB
Pipar flake is an open source PCB design by RasmusKoit, published on GitHub. It is a 2-layer board measuring 55 × 74.1 mm, with 32 components from 8 distinct parts.
By type, the board carries 10 resistors, 9 LEDs, 9 diodes, 2 switches and 1 transistor.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
Pipar is a collection of keyboards
Pipar is a collection of different keyboards and keypads that I have designed. Each PCB in the series has unique features tailored to different needs and preferences.
The Pipar keyboards run ZMK firmware. Board definitions, custom drivers (LED indicators, caps-word events, a recovery watchdog), keymaps, and shields live in the zmk-keyboard-pipar ZMK module — included here as the zmk-keyboard-pipar submodule.
Pipar flake bill of materials (BOM)
32 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AO3416 AO3416 N-channel MOSFET | SOT-23 | Q1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Bourns_Vertical_PEL11L-4xxxF-Sxxxx_1 | CH10 |
| 1 | CK_KMS2xxG | SW_SPST_CK_KMS2xxGP | SW1 |
| 1 | SW_Wuerth_450301014042 | SW_SPDT_PCM12 | SW2 |
| 9 | ~ | LED_0805_2012Metric | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +1 |
| 9 | D | Nexperia_CFP3_SOD-123W | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 9 | 100 | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 1 | PF1206FRF070R01L 4.7k Yageo | R_0805_2012Metric | R10 |
Pipar flake design files
The KiCad project lives in the RasmusKoit/pipar repository on GitHub; these links point at the commit this page was built from.
Pipar flake: common questions
How big is the Pipar flake PCB?
The Pipar flake measures 55 × 74.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pipar flake?
32 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pipar flake design files?
From the RasmusKoit/pipar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pipar flake design in my own project?
The repository has no license, so all rights stay with RasmusKoit. Use it as a reference, and ask the author before reusing the design.
More boards in pipar
Pipar Point
329.9 × 122.8 mm208 parts4LNo license56
Nordic nRFPipar sool
142.4 × 110.5 mm121 parts2LNo license56
Pipar chip
68 × 61.3 mm69 parts4LNo license56
Pipar sool pnp
142.4 × 110.5 mm38 parts2LNo license56
Pipar urchin unibody
223.5 × 112.5 mm26 parts2LNo license56
Similar boards
Lily58 Pro BOTTOM
kata0510
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Lite Rev3 TOP Case
142.5 × 106.4 mm34 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k