STM32

ravilpatel·PCB-Design-in-KiCAD·STM32-I2C_UART_SWD/STM32.kicad_pcb

STM32 PCB layout, top view — open source STM32 board by ravilpatel

About the STM32 PCB

STM32 is an open source STM32 PCB design by ravilpatel, published on GitHub. It is a 2-layer board measuring 41 × 28.8 mm, with 28 components from 18 distinct parts.

Its main chip is the TSSP58038, from the STM32 family. Other key parts include the NE555D. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

From the project

This repository contains the KiCAD 9.0 project files, documentation and assets for a compact 2-layer PCB built around an STM32 microcontroller. The board is designed for manufacturability on standard FR4 (1.6 mm) and targets hobbyist / low-volume production.

This repository contains the KiCAD 9.0 project files, documentation and assets for a compact 2-layer PCB built around an STM32 microcontroller. The board is designed for manufacturability on standard FR4 (1.6 mm) and targets hobbyist / low-volume production.

KiCad 6 STM32 PCB Design Full Tutorial - Phil's Lab

Design software: KiCAD 9.0 Microcontroller (MCU): STM32 (schematic & part references in BOM) Layers: 2 (Top / Bottom) Board dimensions: 41 mm × 28.8 mm Substrate: FR4, 1.6 mm thickness Files included: KiCAD project files, schematic, PCB layout, Gerber export instructions, BOM Protocols…

STM32, from the project README
From the project README

Main components on the STM32

STM32 bill of materials (BOM)

28 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NE555D
AMS1117-3.3
U1
1
TSSP58038
STM32F103C8T6
U2
1
16MHz
Y1
1
SCREW_TERMINAL_01X02
USB_B_Micro
J1
3
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
1N4148WT
RED
D1
1
120R
FB1
1
10u
C1
5
100n
C2, C3, C4, C5, C11
1
10n
C6
2
1u
C7, C8
2
22u
C9, C10
2
10p
C12, C13
1
100K
1K5
R1
1
220K
10k
R2
2
220K
1k5
R3, R4
1
1k5
R5

STM32 design files

The KiCad project lives in the ravilpatel/PCB-Design-in-KiCAD repository on GitHub; these links point at the commit this page was built from.

STM32: common questions

What microcontroller does the STM32 use?

The STM32 is built around the TSSP58038, from the STM32 family.

How big is the STM32 PCB?

The STM32 measures 41 × 28.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32?

28 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32 design files?

From the ravilpatel/PCB-Design-in-KiCAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32 design in my own project?

The repository has no license, so all rights stay with ravilpatel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in PCB-Design-in-KiCAD

Similar boards