BleBomB-Hardware

rdhrobotics·BleBomB-Hardware

BleBomB-Hardware PCB layout, top view — open source board by rdhrobotics

About the BleBomB-Hardware PCB

BleBomB-Hardware is an open source PCB design by rdhrobotics, published on GitHub. It is a 2-layer board measuring 29.6 × 15.8 mm, with 17 components from 16 distinct parts.

Other key parts include the MM32G0001A1T, NRF24L01_BREAKOUT, C82942 and TP4057. By type, the board carries 4 ICs, 3 connectors, 3 capacitors, 3 resistors, 2 switches and 2 diodes.

From the project

BleBomB is a compact embedded 2.4 GHz RF noise generator based on NRF24L01+ and MM32G0001A1T. Includes KiCad schematic, PCB, and Gerber files.

BleBomB is a compact embedded device designed to generate 2.4 GHz noise using an NRF24 module and the MM32G0001A1T MCU.

The device continuously transmits randomized packets in the 2.4 GHz band, which can create heavy interference for nearby wireless communications operating on the same frequency range.

BleBomB is a fully embedded hardware project developed by RDH Roboticss. This repository contains all the necessary hardware design files required to reproduce the device.

Main components on the BleBomB-Hardware

BleBomB-Hardware bill of materials (BOM)

17 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MM32G0001A1T
U1
1
NRF24L01_BREAKOUT
NRF24L01_Breakout
U2
1
C82942
ME6211C33M5G-N
U3
1
TP4057
U5
1
Programmer
J1
1
USB_C_RECEPTACLE_POWERONLY_6P
USB_C_Receptacle_PowerOnly_6P
J2
1
Battery
J4
1
SW_Push
SW1
1
ON/OFF
SW7
1
LED
D1
1
WS2812B
D2
1
100NF
100nF
C5
2
10UF
10uF
C7, C13
1
330E
R1
1
2K
R19
1
10K
R22

BleBomB-Hardware design files

The KiCad project lives in the rdhrobotics/BleBomB-Hardware repository on GitHub; these links point at the commit this page was built from.

BleBomB-Hardware: common questions

How big is the BleBomB-Hardware PCB?

The BleBomB-Hardware measures 29.6 × 15.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BleBomB-Hardware?

17 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BleBomB-Hardware design files?

From the rdhrobotics/BleBomB-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BleBomB-Hardware design in my own project?

The repository has no license, so all rights stay with rdhrobotics. Use it as a reference, and ask the author before reusing the design.