Ebaz sdr
About the Ebaz sdr PCB
Ebaz sdr is an open source PCB design by regymm, published on GitHub. It is a 2-layer board measuring 100 × 71.8 mm, with 39 components from 19 distinct parts.
By type, the board carries 17 resistors, 10 connectors and 1 capacitor.
It belongs with the rf & radio designs in this gallery.
From the project
PYNQ-Z1 + AD936X openwifi capable SDR platform
pynqsdr: main board, converted from Altium so expect small problems. KiCad nighty required. Schematics PDF
br1: HDMI and PMOD direct-connect bridge.
br2: PMOD bridge with LVDS driver DS90LV047A or SN65LVDS047A. Need 2 of this in initial release and current release(v1.1).
br3: HDMI bridge with LVDS receiver DS90LVDS048A and PMOD direct-connect.
br4: HDMI bridge with 4x LVDS to CML translator SN65CML100. Need 2 of this in inital release.
Ebaz sdr bill of materials (BOM)
39 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Header 8X2 | HDR2X8 | J1 |
| 1 | Header 6X2 | HDR2X6 | J2 |
| 1 | Header 4X2 | HDR2X8 | J2J1 |
| 1 | Header 8 | HDR1X8 | J3 |
| 3 | Conn_02x10_Odd_Even | PinSocket_2x10_P2.00mm_Horizontal | J4, J5, J6 |
| 1 | Jack-DC | BarrelJack_Wuerth_6941xx301002 | J7 |
| 1 | CTRL | HDR2X6 | J8 |
| 1 | Conn_01x04_Female | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 2 | 22uF | LC-0805_C | CP1, CP2 |
| 2 | HDMI_A | HDMI_A | HDMI1, HDMI2 |
| 1 | 4.7uH | L1008 | LP1 |
| 2 | Header 6X2 | HDR2X6 | PMODA1, PMODB1 |
| 1 | 10K | LC-0402_R | RP1 |
| 1 | 20K | LC-0402_R | RP2 |
| 1 | 0 | LC-0402_R | RP3 |
| 1 | AP3419 | AP3419 | UP1 |
| 1 | 1nF NC | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C1 |
| 1 | 1MΩ NC | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 16 | 50R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 +8 |
Ebaz sdr design files
The KiCad project lives in the regymm/PYNQSDR repository on GitHub; these links point at the commit this page was built from.
Ebaz sdr: common questions
How big is the Ebaz sdr PCB?
The Ebaz sdr measures 100 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ebaz sdr?
39 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ebaz sdr design files?
From the regymm/PYNQSDR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ebaz sdr design in my own project?
The repository has no license, so all rights stay with regymm. Use it as a reference, and ask the author before reusing the design.
More boards in PYNQSDR
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372