Sunlord LCR Breakout
About the Sunlord LCR Breakout
Sunlord LCR Breakout is an open source PCB design by reivax-boucoi, published on GitHub. It is a 2-layer board measuring 99 × 99 mm, with 44 components from 11 distinct parts.
By type, the board carries 32 connectors, 8 jumpers and 4 transformers.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Repo for all my home projects involving PCBs developped with Kicad
Sunlord LCR Breakout bill of materials (BOM)
44 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | AH | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J1, J9, J17, J25 |
| 4 | AL | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J2, J10, J18, J26 |
| 4 | BH | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J3, J11, J19, J27 |
| 4 | BL | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J4, J12, J20, J28 |
| 4 | CH | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J5, J13, J21, J29 |
| 4 | CL | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J6, J14, J22, J30 |
| 4 | DH | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J7, J15, J23, J31 |
| 4 | DL | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J8, J16, J24, J32 |
| 4 | A-B | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP3, JP5, JP7 |
| 4 | C-D | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP4, JP6, JP8 |
| 4 | Transformer_1P_1S | AW2222_Sunlord_µXFMR | T1, T2, T3, T4 |
Sunlord LCR Breakout design files
The KiCad project lives in the reivax-boucoi/PCB_Kicad repository on GitHub; these links point at the commit this page was built from.
Sunlord LCR Breakout: common questions
How big is the Sunlord LCR Breakout?
The Sunlord LCR Breakout measures 99 × 99 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sunlord LCR Breakout?
44 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sunlord LCR Breakout design files?
From the reivax-boucoi/PCB_Kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sunlord LCR Breakout design in my own project?
The repository has no license, so all rights stay with reivax-boucoi. Use it as a reference, and ask the author before reusing the design.
More boards in PCB_Kicad
Transistor clock
327 × 95.8 mm926 parts2LNo license1
Relay brd
100 × 100 mm141 parts2LNo license1
AVR/ArduinoSolar mppt1
100 × 100 mm133 parts4LNo license1
RCP PWM breakout
99.5 × 75.2 mm130 parts4LNo license1
GD3163 flyback DB
90.6 × 90.6 mm102 parts4LNo license1
LabBooster
74.8 × 69.5 mm79 parts2LNo license1
Usb switch
50 × 50 mm67 parts4LNo license1
AVR/ArduinoElevator altimeter
100 × 55 mm40 parts2LNo license1
AVR/ArduinoBike speed sensor
42.5 × 53.5 mm36 parts2LNo license1
Pwr breakout
167.5 × 48 mm34 parts2LNo license1
Planar XFMR test coupon
50 × 50 mm22 parts4LNo license1
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979