HACKCLUB-Hackpad

rekirxs·HACKCLUB-Hackpad·pcb/MACROPAD.kicad_pcb

HACKCLUB-Hackpad PCB layout, top view — open source board by rekirxs

About the HACKCLUB-Hackpad PCB

HACKCLUB-Hackpad is an open source PCB design by rekirxs, published on GitHub. It is a 2-layer board measuring 90.5 × 63.8 mm, with 27 components from 6 distinct parts.

Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 16 diodes, 9 switches, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

My Macropad entry for the Blueprint event.

A compact macropad project including PCB, schematic, and a fitted case inspired by Serial Experiments Lain.

This repository contains the design files, a simple KMK firmware, and placeholder screenshots for a small 8-key macropad with rotary encoder, underglow LEDs, and a 0.91" OLED.

Bill of Materials (BOM) - Seeed XIAO RP2040 — x1 - Through-hole 1N4148 diodes — x8 - MX-style mechanical switches — x8 - EC11 rotary encoder — x1 - Blank DSA keycaps — x8 - SK6812 MINI-E LEDs — x8 - 0.91 inch OLED display — x1 - M3 x 16 mm screws & M3 heat-set inserts — x4

HACKCLUB-Hackpad, from the project README
From the project README

Main components on the HACKCLUB-Hackpad

HACKCLUB-Hackpad bill of materials (BOM)

27 components, 6 distinct parts.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO
U1
1
Conn_01x04
J1
8
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
1
RotaryEncoder_Switch
SW9
8
SK6812MINI-E
D1, D2, D3, D4, D5, D6, D7, D8
8
1N4148
D9, D10, D11, D12, D13, D14, D15, D16

HACKCLUB-Hackpad design files

The KiCad project lives in the rekirxs/HACKCLUB-Hackpad repository on GitHub; these links point at the commit this page was built from.

HACKCLUB-Hackpad: common questions

How big is the HACKCLUB-Hackpad PCB?

The HACKCLUB-Hackpad measures 90.5 × 63.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HACKCLUB-Hackpad?

27 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the HACKCLUB-Hackpad design files?

From the rekirxs/HACKCLUB-Hackpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HACKCLUB-Hackpad design in my own project?

The repository has no license, so all rights stay with rekirxs. Use it as a reference, and ask the author before reusing the design.

Similar boards