HardLabs

Ovencontroller

remus4444·CAD·Chassis Curing Oven Controller/PCB/ovencontroller/ovencontroller.kicad_pcb

Ovencontroller PCB layout, top view — open source AVR/Arduino board by remus4444

About the Ovencontroller PCB

Ovencontroller is an open source AVR/Arduino PCB design by remus4444, published on GitHub. It is a 2-layer board measuring 66 × 69 mm, with 11 components from 9 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the Pololu_Breakout_A4988. By type, the board carries 3 modules, 3 resistors, 2 diodes, 1 connector and 1 capacitor.

From the project

CAD models.

Main components on the Ovencontroller

Arduino_Nano_v3.xPololu_Breakout_A4988

Ovencontroller bill of materials (BOM)

11 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino_Nano_v3.x
A1
1
Pololu_Breakout_A4988
A2
1
Stepper_Motor_bipolar
M1
1
Conn_01x06_MountingPin
J1
1
Thermistor_NTC
TH1
2
LED
D1, D2
1
0.0001
C1
2
220
R1, R2
1
100000
R3

Ovencontroller design files

The KiCad project lives in the remus4444/CAD repository on GitHub; these links point at the commit this page was built from.

Ovencontroller: common questions

What microcontroller does the Ovencontroller use?

The Ovencontroller is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Ovencontroller PCB?

The Ovencontroller measures 66 × 69 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ovencontroller?

11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ovencontroller design files?

From the remus4444/CAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ovencontroller design in my own project?

The repository has no license, so all rights stay with remus4444. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ovencontroller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in CAD

Similar boards