59 open source boards using the Pololu_Breakout_A4988

Real designs built with the Pololu_Breakout_A4988, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

59 boardsClear filters|Most starred

How designs wire the Pololu_Breakout_A4988

Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the Pololu_Breakout_A4988 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 1, 7Connected to: GND 97%
VDDpin 2Connected to: 3.3V 89%
VMOTpin 8Connected to: 12V 77% · a signal 23%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stepstick by multigcs, Autopatzer by jes, OnStep-JUWEI-17 by satakagi and SatNOGS Rotator Controller v2.4 by AFS-pt.

The Pololu_Breakout_A4988 in open source designs

The gallery holds 59 open source boards using the Pololu_Breakout_A4988 from 51 GitHub repositories; a typical one measures about 94 × 78.4 mm and carries around 33 components.

93% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is Stepstick by multigcs.

Microcontrollers on boards using the Pololu_Breakout_A4988

Pololu_Breakout_A4988: common questions

Where can I find a Pololu_Breakout_A4988 reference design?

Each of the 59 boards on this page is a real design using the Pololu_Breakout_A4988. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the Pololu_Breakout_A4988?

The AMS1117-3.3, ESP32-WROOM-32, L7805, TB6612FNG and 74HC595 appear in the most repositories here.

Which microcontrollers do boards using the Pololu_Breakout_A4988 use?

Most are built on ESP32 (22), AVR/Arduino (13), STM32 (6) and NXP (2).

How big is a typical board using the Pololu_Breakout_A4988?

The median is 94 × 78.4 mm, and 93% are two-layer designs.

What is the most popular open source board using the Pololu_Breakout_A4988?

By GitHub stars, Stepstick by multigcs, with 91 stars.

Can I simulate one of these boards using the Pololu_Breakout_A4988 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part