Eurorack bastl kompas
rhinocerose·eurorack-bastl-kompas·kicad/kompas/kompas.kicad_pcb
About the Eurorack bastl kompas PCB
Eurorack bastl kompas is an open source AVR/Arduino PCB design by rhinocerose, published on GitHub. It is a 2-layer board measuring 59.2 × 128.6 mm, with 78 components from 21 distinct parts.
Its main chip is the ATmega328-AU, from the AVR/Arduino family. Other key parts include the MCP6004 and 7805_PINS. By type, the board carries 27 resistors, 16 connectors, 9 diodes, 5 transistors, 4 capacitors and 3 ICs.
It belongs with the audio designs in this gallery.
From the project
As an attempt to learn kicad I decided to take the open source Bastl Kompas eurorack module, which is a 5hp through-hole soldering project, and redesign it as a 4hp SMD soldering project.
As an attempt to learn kicad I decided to take the open source Bastl Kompas eurorack module, which is a 5hp through-hole soldering project, and redesign it as a 4hp SMD soldering project.
Mouser BOM or find the excel file in this repository.
Parts should come out to be below 20 euros.
The SMD version has a different pin mapping which should be described in the code. The reason for this is the following:

Main components on the Eurorack bastl kompas
Eurorack bastl kompas bill of materials (BOM)
78 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328-AU | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | MCP6004 | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | 7805_PINS | SOT-223 | U3 |
| 5 | 2N3904 | SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 1 | Crystal_GND2 | Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J5 |
| 14 | Conn_01x10_Male | PinHeader_1x03_P2.54mm_Vertical | J6, J7, J8, J9, J10, J11, J12, J13 +6 |
| 1 | Polyfuse | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 4 | PJ301M-12 | PJ301M-12 | J_CLOCK0, J_IN1, J_OUT1, J_RESET0 |
| 4 | PJ301M-12 | PJ301M-12-2hole | J_IN0, J_IN2, J_OUT0, J_OUT2 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Vertical | J_POWER0 |
| 3 | 100k | Alpha9mmPot | RV0, RV1, RV2 |
| 1 | 1N4007 | D_SMB_Handsoldering | D1 |
| 8 | LED | LED_D3.0mm | D2, D3, D4, D5, D6, D7, D8, D9 |
| 2 | 10u | CP_Elec_5x5.4 | C1, C4 |
| 2 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 6 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R5, R6, R13, R16 |
| 3 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R28 |
| 15 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R14, R15, R17, R19, R21, R23 +7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R20, R22 |
Eurorack bastl kompas design files
The KiCad project lives in the rhinocerose/eurorack-bastl-kompas repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/kompas/kompas.kicad_pcb
- BOMBOM.xls
Eurorack bastl kompas: common questions
What microcontroller does the Eurorack bastl kompas use?
The Eurorack bastl kompas is built around the ATmega328-AU, from the AVR/Arduino family.
How big is the Eurorack bastl kompas PCB?
The Eurorack bastl kompas measures 59.2 × 128.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eurorack bastl kompas?
78 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Eurorack bastl kompas design files?
From the rhinocerose/eurorack-bastl-kompas repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Eurorack bastl kompas design in my own project?
The repository has no license, so all rights stay with rhinocerose. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Eurorack bastl kompas without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k