Blinky-Board
RichardM-1337·Blinky-Board·PCB/BlinkyBoard.kicad_pcb
About the Blinky-Board
Blinky-Board is an open source PCB design by RichardM-1337, published on GitHub under the MIT license. It is a 2-layer board measuring 11.8 × 19.4 mm, with 19 components from 10 distinct parts.
Other key parts include the NE555P and 4017. By type, the board carries 10 diodes, 2 ICs, 2 connectors, 2 capacitors and 2 resistors.
From the project
A pikachu shaped blinky board that will look dope on my desk!
This was basically another project that helped brush my KiCAD and PCB design skills again because I did step away from doing projects for a bit due to school. But of course, now I'm back!
Main components on the Blinky-Board
Blinky-Board bill of materials (BOM)
19 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | 4017 | N16 | U2 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x01_Socket | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | 50k | Potentiometer_Vishay_T93YA_Vertical | RV1 |
| 10 | LED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | 0.01uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1uF | C_Disc_D7.5mm_W2.5mm_P5.00mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Blinky-Board design files
The KiCad project lives in the RichardM-1337/Blinky-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/BlinkyBoard.kicad_pcb
- SchematicPCB/BlinkyBoard.kicad_sch
Blinky-Board: common questions
How big is the Blinky-Board?
The Blinky-Board measures 11.8 × 19.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blinky-Board?
19 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Blinky-Board design files?
From the RichardM-1337/Blinky-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Blinky-Board design in my own project?
Yes, under the terms of its MIT license, which RichardM-1337 chose for the repository.