HardLabs

Rigidus.ru

rigidus·rigidus.ru·org/lrn/apollo/apollo/apollo.kicad_pcb

Rigidus.ru PCB layout, top view — open source AVR/Arduino board by rigidus

About the Rigidus.ru PCB

Rigidus.ru is an open source AVR/Arduino PCB design by rigidus, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 243.3 × 134.9 mm, with 57 components from 20 distinct parts.

Its main chip is the ATmega168P-20PU, from the AVR/Arduino family. Other key parts include the 74HC595 and 5461AS-1. By type, the board carries 10 resistors, 9 connectors, 5 transistors, 4 ICs, 2 diodes and 1 buzzer.

From the project

Contacts: email: i.am.rigidus טּ gmail.com jabber: rigidus@jabber.ru

Main components on the Rigidus.ru

74HC5955461AS-1ATmega168P-20PU

Rigidus.ru bill of materials (BOM)

57 components, 20 distinct parts.

QtyPartRefs
1
74HC595
U1
1
5461AS-1
U2
1
74HC595
U3
1
ATmega168P-20PU
U4
5
PN2222A
Q1, Q2, Q3, Q4, Q6
2
Conn_01x01_Male
J1, J2
6
Conn_01x01_Male
J4, J6, J7, J8, J13, J17
1
Conn_01x01_Male
J12
1
Buzzer
BZ1
3
Conn_01x01_Male
J_MISO_1, J_MOSI_1, J_SCK_1
1
SRD-05VDC-SL-C
K1
1
100 Ohm
R_RED_1
4
R
Rb1, Rb2, Rb3, Rb4
16
SW_SPST_DIODE
SW_0_0, SW_0_1, SW_0_2, SW_0_3, SW_0_4, SW_0_5, SW_0_6, SW_0_7 +8
1
LED
D_RED_1
1
LED
D3
1
DIODE
D4
8
R
R1, R2, R3, R4, R5, R6, R7, R8
1
100 Ohm
R11
1
4,3KOhm
R12

Rigidus.ru design files

The KiCad project lives in the rigidus/rigidus.ru repository on GitHub; these links point at the commit this page was built from.

Rigidus.ru: common questions

What microcontroller does the Rigidus.ru use?

The Rigidus.ru is built around the ATmega168P-20PU, from the AVR/Arduino family.

How big is the Rigidus.ru PCB?

The Rigidus.ru measures 243.3 × 134.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rigidus.ru?

57 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rigidus.ru design files?

From the rigidus/rigidus.ru repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Rigidus.ru design in my own project?

Yes, under the terms of its AGPL-3.0 license, which rigidus chose for the repository.

Can I test firmware for the Rigidus.ru without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards