HardLabs

RKD ORDER 2

rikkodo·Rikkodo_PCB·RKD_Common/RKD_ORDER_2_0.8mm/RKD_ORDER_2.kicad_pcb

RKD ORDER 2 PCB layout, top view — open source RP2040/RP2350 board by rikkodo

About the RKD ORDER 2 PCB

RKD ORDER 2 is an open source RP2040/RP2350 PCB design by rikkodo, published on GitHub. It is a 2-layer board measuring 82.2 × 81 mm, with 15 components from 7 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 10 connectors, 2 ICs and 2 LEDs.

From the project

作成には以下の方々のシンボルやフットプリント、知見を利用させていただいています。

作成には以下の方々のシンボルやフットプリント、知見を利用させていただいています。

koktoh氏のライブラリ BrownSugarKBDKiCad_Library

DreaM117er氏のライブラリ DreaM117er KiCAD Library

Tomotsugu Kaneko氏のライブラリ BOB-PMW3360-SUMI

Tomotsugu Kaneko氏のライブラリ BOB-PMW3360-SEIBOKU

This project is licensed under the CERN OHL-P v2. You may use, distribute, and modify this design under the terms of the CERN OHL-P v2. Original design by snize.

Main components on the RKD ORDER 2

Pico

RKD ORDER 2 bill of materials (BOM)

15 components, 7 distinct parts.

QtyPartRefs
2
Pico
U1, U2
4
Qwiic_RA
J1, J4, J6, J8
3
Conn_01x06
J2, J5, J9
2
Conn_01x24
J3, J10
1
Conn_01x06
J7
1
az1uball
Trackball1
2
OLED
OL1, OL2

RKD ORDER 2 design files

The KiCad project lives in the rikkodo/Rikkodo_PCB repository on GitHub; these links point at the commit this page was built from.

RKD ORDER 2: common questions

What microcontroller does the RKD ORDER 2 use?

The RKD ORDER 2 is built around the Pico, from the RP2040/RP2350 family.

How big is the RKD ORDER 2 PCB?

The RKD ORDER 2 measures 82.2 × 81 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RKD ORDER 2?

15 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the RKD ORDER 2 design files?

From the rikkodo/Rikkodo_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RKD ORDER 2 design in my own project?

The repository has no license, so all rights stay with rikkodo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RKD ORDER 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Rikkodo_PCB

Similar boards