381 open source boards using the Pico

Real designs built with the Pico, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

381 boardsClear filters|Most starred

How designs wire the Pico

Read from the KiCad layouts of 284 open source designs, one per repository: what each pin of the Pico connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3_EN pin is left unconnected on 256 of 282 designs (3.3V on 9, a signal on 16).
  • The ADC_VREF pin is left unconnected on 255 of 283 designs (3.3V on 8, a signal on 20).
  • The RUN pin is left unconnected on 207 of 283 designs (a signal on 76).
  • The SWCLK pin is left unconnected on 193 of 226 designs (a signal on 32).
GNDpin 3, 8, 13, 18, 23, 28, 38, 42Connected to: GND 81% · not connected 18%
RUNpin 30Connected to: Not connected 73% · a signal 27%
ADC_VREFpin 35Connected to: Not connected 90%
3V3pin 36Connected to: 3.3V 61% · not connected 30%
3V3_ENpin 37Connected to: Not connected 91%
SWCLKpin 41Connected to: Not connected 85%
SWDIOpin 43Connected to: Not connected 85%

29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jitx design by gusmanb, Sofle Pico by josefadamcik, Piantor by beekeeb and PicoGUS by polpo.

The Pico in open source designs

The gallery holds 381 open source boards using the Pico from 295 GitHub repositories; a typical one measures about 102 × 87.8 mm and carries around 53 components.

88% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Jitx design by gusmanb.

Microcontrollers on boards using the Pico

Pico: common questions

Where can I find a Pico reference design?

Each of the 381 boards on this page is a real design using the Pico. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Pico 3V3_EN pin connected?

The 3V3_EN pin is left unconnected on 256 of 282 designs (3.3V on 9, a signal on 16). Counted from the KiCad layouts of 284 open source designs using the Pico.

How is the Pico ADC_VREF pin connected?

The ADC_VREF pin is left unconnected on 255 of 283 designs (3.3V on 8, a signal on 20). Counted from the KiCad layouts of 284 open source designs using the Pico.

How is the Pico RUN pin connected?

The RUN pin is left unconnected on 207 of 283 designs (a signal on 76). Counted from the KiCad layouts of 284 open source designs using the Pico.

What parts are used alongside the Pico?

The 74LVC245, LM7805_TO220, L7805, LM358 and 74HC595 appear in the most repositories here.

Which microcontrollers do boards using the Pico use?

Most are built on RP2040/RP2350 (381).

How big is a typical board using the Pico?

The median is 102 × 87.8 mm, and 88% are two-layer designs.

What is the most popular open source board using the Pico?

By GitHub stars, Jitx design by gusmanb, with 4,991 stars.

Can I simulate one of these boards using the Pico before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part