Golfcart wiring harness
ril3y·golfcart-wiring-harness·wire_harness/wire_harness.kicad_pcb
About the Golfcart wiring harness PCB
Golfcart wiring harness is an open source STM32 PCB design by ril3y, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 96 components from 38 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the TPS561208DDCR, SN65HVD230DR and HC-RJ45-5JA-2-2. By type, the board carries 40 resistors, 23 capacitors, 14 diodes, 6 connectors, 4 ICs and 2 transistors.
From the project
KiCad project for golf cart wiring harness design
A KiCad project for designing a golf cart wiring harness with CAN bus communication and microcontroller integration.
This project contains the complete KiCad design files for a golf cart wiring harness system that includes:
- Microcontroller-based control unit - CAN bus communication interface - Wire harness connector layouts - PCB design for control electronics

Main components on the Golfcart wiring harness
Golfcart wiring harness bill of materials (BOM)
96 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | U2 |
| 1 | TPS561208DDCR | TSOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U3 |
| 1 | SN65HVD230DR | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U4 |
| 1 | HC-RJ45-5JA-2-2 | RJ45-TH_HCTL_HC-RJ45-5JA-2-2-Y | U5 |
| 1 | BSS138 | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | Q1 |
| 1 | IRF7493TRPBF | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | Q3 |
| 1 | 7B008000F01 | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | M2 UART | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | M1 UART | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | TERM | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PWR | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | TC2050-IDC | Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J5 |
| 1 | DEBUG | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 2 | 1TS003B-1400-3500A | KEY-SMD_1TS003B | BOOT1, RESET1 |
| 3 | 9-6437287-8 | CONN-TH_9-6437287-8 | CART_IN1, MOTOR1, MOTOR2 |
| 1 | SS510_C513471 | SMA_L4.3-W2.6-LS5.0-RD | D1 |
| 1 | 12V PWR | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 8 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4, D6, D7, D8, D10, D11, D13 |
| 1 | 3V3 PWR | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | SM712_C521963 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | D9 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RBLINKLED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D12 |
| 1 | SMBJ18CA | SMB_L4.6-W3.6-LS5.3-BI | D14 |
| 1 | 2.2uH | L1008 | L1 |
| 9 | .1uF | C0603 | C1, C15, C16, C17, C18, C19, C20, C21 +1 |
| 2 | 10uF | C0805 | C2, C12 |
| 3 | 22uF | C0805 | C3, C7, C24 |
| 2 | 12pF | C0402 | C4, C14 |
| 7 | .1uf | C0805 | C5, C6, C8, C9, C10, C11, C13 |
| 1 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 4 | 10k | R0603 | R2, R15, R34, R35 |
| 2 | 100k | R0603 | R3, R37 |
| 10 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7, R8, R11, R12, R13 +2 |
| 9 | 34k | R0603 | R9, R10, R20, R21, R22, R23, R24, R31 +1 |
| 5 | 220 | R0603 | R17, R28, R29, R30, R36 |
| 4 | 10k | R0805 | R18, R27, R33, R38 |
| 2 | 120 | R0603 | R19, R26 |
| 1 | 33k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 2 | 10k | RES-ARRAY-SMD_1206-L3.2-W1.6-P0.64 | RN1, RN2 |
Golfcart wiring harness design files
The KiCad project lives in the ril3y/golfcart-wiring-harness repository on GitHub; these links point at the commit this page was built from.
Golfcart wiring harness: common questions
What microcontroller does the Golfcart wiring harness use?
The Golfcart wiring harness is built around the STM32F103C8T6, from the STM32 family.
How big is the Golfcart wiring harness PCB?
The Golfcart wiring harness measures 100 × 100 mm, has 2 copper layers and is 1.6062 mm thick.
How many components are on the Golfcart wiring harness?
96 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Golfcart wiring harness design files?
From the ril3y/golfcart-wiring-harness repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Golfcart wiring harness design in my own project?
The repository has no license, so all rights stay with ril3y. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Golfcart wiring harness without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k