6 open source boards using the TPS561208DDCR
Real designs built with the TPS561208DDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
DCDCBuckRegulator
landoncharris1
29 × 18.5 mm8 parts2LNo license1AVR/Arduino
BDCMotorController
nunosousa
203.5 × 90 mm313 parts4LMIT0STM32
Golfcart wiring harness
ril3y
100 × 100 mm96 parts2LNo license0Buck
Ashok-0167
25.5 × 27.5 mm8 parts2LNo license0Buck
gokul-rm
25.5 × 27.5 mm8 parts2LNo license0AVR/Arduino
RotationEncoder
nunosousa
50 × 25 mm47 parts4LMIT0
How designs wire the TPS561208DDCR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS561208DDCR connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF.
- The VIN pin has a capacitor to GND on 3 of 3 designs, most often 22 µF (then 100 nF).
- The VFB pin has a resistor to GND on 3 of 3 designs, most often 10 kΩ.
- The EN pin has a capacitor to GND on 3 of 3 designs, most often 22 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| SWpin 2 | Connected to: Signal 100% |
|
| VINpin 3 | Connected to: Signal 67% · 12V 33% |
|
| VFBpin 4 | Connected to: Signal 100% |
|
| ENpin 5 | Connected to: Signal 67% · 12V 33% |
|
| VBSTpin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DCDCBuckRegulator by landoncharris1, Buck by Ashok-0167, Buck by gokul-rm and BDCMotorController by nunosousa.
The TPS561208DDCR in open source designs
The gallery holds 6 open source boards using the TPS561208DDCR from 5 GitHub repositories; a typical one measures about 39.5 × 27.5 mm and carries around 28 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is DCDCBuckRegulator by landoncharris1.
Microcontrollers on boards using the TPS561208DDCR
What boards using the TPS561208DDCR are built for
TPS561208DDCR: common questions
Where can I find a TPS561208DDCR reference design?
Each of the 6 boards on this page is a real design using the TPS561208DDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS561208DDCR SW pin connected?
The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS561208DDCR.
How is the TPS561208DDCR VIN pin connected?
The VIN pin has a capacitor to GND on 3 of 3 designs, most often 22 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS561208DDCR.
What resistor goes on the TPS561208DDCR VFB pin?
The VFB pin has a resistor to GND on 3 of 3 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the TPS561208DDCR.
Which microcontrollers do boards using the TPS561208DDCR use?
Most are built on AVR/Arduino (2) and STM32 (1).
How big is a typical board using the TPS561208DDCR?
The median is 39.5 × 27.5 mm, and 67% are two-layer designs.
What is the most popular open source board using the TPS561208DDCR?
By GitHub stars, DCDCBuckRegulator by landoncharris1, with 1 stars.
Can I simulate one of these boards using the TPS561208DDCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.