3D-gesture leds

rmingon·3D-gesture-leds·hardware/hardware.kicad_pcb

3D-gesture leds PCB layout, top view — open source STM32 board by rmingon

About the 3D-gesture leds PCB

3D-gesture leds is an open source STM32 PCB design by rmingon, published on GitHub. It is a 2-layer board measuring 160 × 160 mm, with 37 components from 8 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the MGC3130-I_MQ. By type, the board carries 16 diodes, 10 resistors, 8 capacitors, 2 ICs and 1 connector.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

A circular LED display driven by an STM32F103 microcontroller and an MGC3130 3D gesture sensor to control WS2812 (NeoPixel) LEDs via hand movements.

A circular LED display driven by an STM32F103 microcontroller and an MGC3130 3D gesture sensor to control WS2812 (NeoPixel) LEDs via hand movements. The project includes KiCad source files, 3D renders, and Gerber exports for easy fabrication.

- 3D Gesture Control: Leverage the Microchip MGC3130 to detect hand gestures (swipe, wave, hover) and translate them into LED patterns. - STM32F103 MCU: Cortex‑M3 core running at 72 MHz, handling USB, I²C, and the WS2812 timing-critical data stream. - LED Ring: 16 WS2812B individually addressable RGB LEDs arranged in a circular pattern for smooth…

3D-gesture leds, from the project README
From the project README

Main components on the 3D-gesture leds

MGC3130-I_MQSTM32F103C8Tx

3D-gesture leds bill of materials (BOM)

37 components, 8 distinct parts.

QtyPartRefs
1
MGC3130-I_MQ
Microchip
U1
1
STM32F103C8Tx
U2
1
Conn_01x04
J1
16
WS2812B
D1, D2, D3, D4, D5, D6, D7, D8 +8
2
C_Small
C1, C2
5
2.2uf
C3, C5, C6, C7, C8
1
100nf
C4
10
R_Small
R1, R2, R3, R4, R5, R6, R7, R8 +2

3D-gesture leds design files

The KiCad project lives in the rmingon/3D-gesture-leds repository on GitHub; these links point at the commit this page was built from.

3D-gesture leds: common questions

What microcontroller does the 3D-gesture leds use?

The 3D-gesture leds is built around the STM32F103C8Tx, from the STM32 family.

How big is the 3D-gesture leds PCB?

The 3D-gesture leds measures 160 × 160 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 3D-gesture leds?

37 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the 3D-gesture leds design files?

From the rmingon/3D-gesture-leds repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 3D-gesture leds design in my own project?

The repository has no license, so all rights stay with rmingon. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 3D-gesture leds without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards