Transmitter ESPV1
RobbeElsermans·RC-Car·RC Transmitter/PCB/Transmitter_ESPV1/Transmitter_ESPV1.kicad_pcb
About the Transmitter ESPV1 PCB
Transmitter ESPV1 is an open source AVR/Arduino PCB design by RobbeElsermans, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 100 × 40.2 mm, with 64 components from 27 distinct parts.
Its main chip is the ATmega328P-M, from the AVR/Arduino family. Other key parts include the AMS1117-3.3 and NRF24L01_Breakout. By type, the board carries 15 resistors, 14 test points, 14 capacitors, 7 switches, 5 connectors and 4 diodes.
From the project
code and files for my Tamiya Monster beetle
I'm refreshing my Tamiyan monster beetle with new 3D printed parts. The transmitter is lost by the years so I'm making a new "experimental" one.
Sadly my gearbox broke (a couple of times with 3D printed gear. maybe I'll try carbon or even hard TPU for more durability) so I'm planning on redesigning the gearbox.
Main components on the Transmitter ESPV1
Transmitter ESPV1 bill of materials (BOM)
64 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ATmega328P-M | QFP80P900X900X120-32N | U2 |
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U5 |
| 1 | Crystal | Crystal_HC49-4H_Vertical | Y1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | SW_Push | SW_SPST_CK_RS282G05A3 | SW1 |
| 2 | SW_Push | SW_PUSH_6mm | SW2, SW3 |
| 2 | SW_SPDT | Toggle_EdgeMount | SW4, SW5 |
| 2 | Joystick | JoyStick | SW6, SW7 |
| 14 | TestPoint | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 +6 |
| 1 | 1N4007 | D_5W_P10.16mm_Horizontal | D1 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4 |
| 2 | 10µF | CP_Radial_D6.3mm_P2.50mm | C1, C11 |
| 5 | 10µ | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C7, C13, C14 |
| 2 | 1µ | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C8 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 5 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R7, R10, R15 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R6 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R8, R9, R11, R12 |
| 2 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14 |
Transmitter ESPV1 design files
The KiCad project lives in the RobbeElsermans/RC-Car repository on GitHub; these links point at the commit this page was built from.
Transmitter ESPV1: common questions
What microcontroller does the Transmitter ESPV1 use?
The Transmitter ESPV1 is built around the ATmega328P-M, from the AVR/Arduino family.
How big is the Transmitter ESPV1 PCB?
The Transmitter ESPV1 measures 100 × 40.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Transmitter ESPV1?
64 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Transmitter ESPV1 design files?
From the RobbeElsermans/RC-Car repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Transmitter ESPV1 design in my own project?
Yes, under the terms of its Apache-2.0 license, which RobbeElsermans chose for the repository.
Can I test firmware for the Transmitter ESPV1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in RC-Car
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k