HardLabs

ArduinoDriverSheild

RobertPHeller·AnimatedSigns·ArduinoDriverSheild/ArduinoDriverSheild.kicad_pcb

ArduinoDriverSheild PCB layout, top view — open source AVR/Arduino board by RobertPHeller

About the ArduinoDriverSheild PCB

ArduinoDriverSheild is an open source AVR/Arduino PCB design by RobertPHeller, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 11 components from 8 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family. Other key parts include the TBD62083A. By type, the board carries 10 connectors and 1 IC.

Main components on the ArduinoDriverSheild

TBD62083A

ArduinoDriverSheild bill of materials (BOM)

11 components, 8 distinct parts.

QtyPartRefs
1
TBD62083A
U101
1
Screw_Terminal_01x02
J101
1
Screw_Terminal_01x09
J102
1
Power
P1
1
Analog
P2
1
Digital
P3
1
Digital
P4
4
CONN_01X01
P5, P6, P7, P8

ArduinoDriverSheild design files

The KiCad project lives in the RobertPHeller/AnimatedSigns repository on GitHub; these links point at the commit this page was built from.

ArduinoDriverSheild: common questions

What microcontroller does the ArduinoDriverSheild use?

The ArduinoDriverSheild is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the ArduinoDriverSheild PCB?

The ArduinoDriverSheild measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArduinoDriverSheild?

11 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArduinoDriverSheild design files?

From the RobertPHeller/AnimatedSigns repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ArduinoDriverSheild design in my own project?

Yes, under the terms of its GPL-2.0 license, which RobertPHeller chose for the repository.

Can I test firmware for the ArduinoDriverSheild without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in AnimatedSigns

Similar boards