8 open source boards using the TBD62083A
Real designs built with the TBD62083A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-D0WD-V3-ControlStand-V0-0
RobertPHeller
34.5 × 23.1 mm166 parts2LGPL-3.03ESP32
ESP32-DevKitC3-Simple-Thermostat
jrtaylor71
133 × 89.5 mm32 parts4LNo license2PointController
46nori
220 × 180 mm125 parts2LGPL-3.00ESP32
ESP32-T7S3-ControlStand
RobertPHeller
199.4 × 126.4 mm139 parts2LGPL-3.03ESP32ControlStand
RobertPHeller
47.6 × 41.9 mm101 parts2LGPL-3.03BF-005
botanicfields
96.5 × 91.4 mm31 parts2LCC0-1.02MemExpansion
ja1umi
155 × 114 mm27 parts2LMIT10AVR/Arduino
ArduinoDriverSheild
RobertPHeller
68.6 × 53.3 mm11 parts2LGPL-2.01
How designs wire the TBD62083A
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TBD62083A connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 9 | Connected to: GND 83% · 5V 17% | — |
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MemExpansion by ja1umi, ESP32-D0WD-V3-ControlStand-V0-0 by RobertPHeller, BF-005 by botanicfields and ESP32-DevKitC3-Simple-Thermostat-PCB by jrtaylor71.
The TBD62083A in open source designs
The gallery holds 8 open source boards using the TBD62083A from 6 GitHub repositories; a typical one measures about 114.8 × 90.5 mm and carries around 67 components.
88% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is MemExpansion by ja1umi.
Microcontrollers on boards using the TBD62083A
What boards using the TBD62083A are built for
TBD62083A: common questions
Where can I find a TBD62083A reference design?
Each of the 8 boards on this page is a real design using the TBD62083A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TBD62083A use?
Most are built on ESP32 (3) and AVR/Arduino (1).
How big is a typical board using the TBD62083A?
The median is 114.8 × 90.5 mm, and 88% are two-layer designs.
What is the most popular open source board using the TBD62083A?
By GitHub stars, MemExpansion by ja1umi, with 10 stars.
Can I simulate one of these boards using the TBD62083A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.