31 open source boards using the 74LVC2G14
Real designs built with the 74LVC2G14, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Dual button doorbell
espena
68.6 × 68.6 mm79 parts4LGPL-3.026Toern
Soundpauli
160 × 71 mm118 parts4LCC-BY-NC-4.021AVR/Arduino
Bkm-10rlternative
skumlos
210.8 × 74.9 mm244 parts4LNo license15Osa103k
k3it
82.6 × 53 mm267 parts2LNo license6Vape light
sbyd-space
58.3 × 15 mm33 parts2LCERN-OHL-P-2.04Base board
GeniePod
90 × 90 mm216 parts6LCERN-OHL-S-2.02ValTronix-VTM0001-EnergyMonitor
vmarzlin
100 × 100 mm111 parts2LGPL-3.01RP2040/RP2350
Best
sequoia-hope
33.7 × 71.8 mm252 parts6LMIT0MotorDriverBoard v2
robertpuccinelli
116.5 × 57 mm119 parts2LNo license0ESP32
Chiller
bullestock
94 × 57 mm68 parts2LNo license0AVR/Arduino
16299-balancing robot
SuperTails
95 × 82 mm43 parts4LNo license0ESP32
RFID-IP
MilanR312
48.3 × 71.1 mm18 parts2LMIT0- schematic only · 143 partsAVR/Arduino
Protoboard
adam-szaj
143 partsMIT0 - schematic only · 4 parts
Odin
daviskacer
4 partsCustom license0 Osa103k backup
k3it
82.6 × 53 mm267 parts2LNo license6Stencil
jerry-kerenzikov
82 × 80 mm169 parts4LCERN-OHL-S-2.00Capper Decapper
robertpuccinelli
77.5 × 42.5 mm84 parts4LNo license0Module
steand
76.2 × 29.2 mm14 parts2LGPL-3.00Diego Checkmate
CRG-Glen
275 × 95 mm126 parts4LCERN-OHL-S-2.025Microchip SAM
Tooling Board
EasternEdgeRobotics
104.7 × 67.4 mm92 parts2LMIT2FPGA
Alu
jerry-kerenzikov
100 × 51.9 mm78 parts4LCERN-OHL-S-2.00Manual gpio board v2
asinghani
81.3 × 52.7 mm49 parts4LNo license08-bit register
jerry-kerenzikov
100 × 51.9 mm65 parts4LCERN-OHL-S-2.00Program counter
jerry-kerenzikov
100 × 51.9 mm61 parts4LCERN-OHL-S-2.00RC2014-16550-UART-V21
dennisperry
104 × 28 mm19 parts2LNo license0Memory 64K
jerry-kerenzikov
100 × 51.9 mm59 parts4LCERN-OHL-S-2.00MiSTeryShield20kRPiPicoUSB
MiSTle-Dev
100 × 57 mm51 parts2LNo license22Instruction register
jerry-kerenzikov
100 × 31.6 mm27 parts4LCERN-OHL-S-2.00Misteryshield20k
MiSTle-Dev
57 × 57 mm35 parts2LNo license22Microinstruction counter
jerry-kerenzikov
100 × 30 mm26 parts4LCERN-OHL-S-2.00Misteryshield20k m0s
MiSTle-Dev
57 × 57 mm32 parts2LNo license22
How designs wire the 74LVC2G14
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the 74LVC2G14 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 10 of 19 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 1 | Connected to: A connector 47% |
|
| GNDpin 2 | Connected to: GND 95% | — |
| 2Ypin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 3.3V 95% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dual button doorbell by espena, Diego Checkmate by CRG-Glen, Misteryshield20k by MiSTle-Dev and Toern by Soundpauli.
The 74LVC2G14 in open source designs
The gallery holds 31 open source boards using the 74LVC2G14 from 21 GitHub repositories; a typical one measures about 95 × 57 mm and carries around 68 components.
55% use four copper layers or more, and 55% carry an open source license.
The most starred is Dual button doorbell by espena.
Parts used alongside the 74LVC2G14
Microcontrollers on boards using the 74LVC2G14
What boards using the 74LVC2G14 are built for
74LVC2G14: common questions
Where can I find a 74LVC2G14 reference design?
Each of the 31 boards on this page is a real design using the 74LVC2G14. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC2G14 VCC pin?
The VCC pin has a decoupling capacitor on 10 of 19 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 19 open source designs using the 74LVC2G14.
Which microcontrollers do boards using the 74LVC2G14 use?
Most are built on AVR/Arduino (3), ESP32 (3), FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the 74LVC2G14?
The median is 95 × 57 mm, and 45% are two-layer designs.
What is the most popular open source board using the 74LVC2G14?
By GitHub stars, Dual button doorbell by espena, with 26 stars.
Can I simulate one of these boards using the 74LVC2G14 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.