Roboballers-2025-Main
RoboBallers·Roboballers-2025-Main_Pcb
About the Roboballers-2025-Main PCB
Roboballers-2025-Main is an open source NXP PCB design by RoboBallers, published on GitHub. It is a 4-layer board measuring 120 × 120 mm, with 116 components from 19 distinct parts.
Its main chip is the TEENSY4.1, from the NXP family. Other key parts include the VNH7070ASTR, TSOP25XX, V_REGULATOR_-_5V, OPENMV_H7_R2 and MCP3008. By type, the board carries 40 resistors, 36 ICs, 28 capacitors, 7 connectors, 4 switches and 1 diode.
Main components on the Roboballers-2025-Main
Roboballers-2025-Main bill of materials (BOM)
116 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | VNH7070ASTR | SO-16N_STM-M | U1, U2, U3, U4 |
| 1 | TEENSY4.1 Teensy4.1 | Teensy41 | U5 |
| 24 | TSOP25XX TSOP25xx | TO_SP4038_VIS | U6, U8, U9, U10, U13, U14, U16, U18 +16 |
| 1 | V_REGULATOR_-_5V V_Regulator_-_5v | TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | U7 |
| 1 | OPENMV_H7_R2 OpenMV_H7_R2 | OpenMV | U11 |
| 3 | MCP3008 | DIP-16_W7.62mm | U12, U27, U28 |
| 1 | SEN0140 | Compass Sensor DFRobot | U15 |
| 1 | RockerSwitch | RF1-1A-DC-2-B-2 | U17 |
| 4 | CONN_01X02 Conn_01x02 | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J1, J2, J3, J4 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | Pads | J5 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Bottom_Pcb | IDC-Header_2x05_P2.54mm_Vertical | J7 |
| 4 | OS102011MS2QN1 | SPDT_OS102011_CNK | SW1, SW2, SW3, SW4 |
| 1 | LED | LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z1.6mm | D1 |
| 28 | 0.1UF 0.1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +20 |
| 28 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R13, R14, R15, R17 +20 |
| 8 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R28, R30 |
| 1 | R_Photo | R_LDR_4.9x4.2mm_P2.54mm_Vertical | R40 |
Roboballers-2025-Main design files
The KiCad project lives in the RoboBallers/Roboballers-2025-Main_Pcb repository on GitHub; these links point at the commit this page was built from.
Roboballers-2025-Main: common questions
What microcontroller does the Roboballers-2025-Main use?
The Roboballers-2025-Main is built around the TEENSY4.1, from the NXP family.
How big is the Roboballers-2025-Main PCB?
The Roboballers-2025-Main measures 120 × 120 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Roboballers-2025-Main?
116 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Roboballers-2025-Main design files?
From the RoboBallers/Roboballers-2025-Main_Pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Roboballers-2025-Main design in my own project?
The repository has no license, so all rights stay with RoboBallers. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Roboballers-2025-Main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532