CAN to Ethernet
About the CAN to Ethernet PCB
CAN to Ethernet is an open source PCB design by RoboJackets, published on GitHub. It is a 2-layer board measuring 60.3 × 72.8 mm, with 12 components from 11 distinct parts.
Other key parts include the TPSM84205EAB. By type, the board carries 3 diodes, 3 capacitors, 2 resistors, 1 IC, 1 connector and 1 fuse.
From the project
RoboJackets RoboRacing Electrical repository
Main components on the CAN to Ethernet
CAN to Ethernet bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPSM84205EAB | TPSM84205EAB | U1 |
| 1 | Barrel_Jack | CUI_PJ-037A | J1 |
| 1 | Schottky - LSM115JE3/TR13 | DO-214BA_MCH | CR1 |
| 1 | Fuse 500mA | Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | YELLOW | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | TVS - D5V0L1B2WS-7 | D_SOD-323_HandSoldering | D2 |
| 1 | GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 47uF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C3 |
| 1 | 499R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 150R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
CAN to Ethernet design files
The KiCad project lives in the RoboJackets/roboracing-electrical repository on GitHub; these links point at the commit this page was built from.
CAN to Ethernet: common questions
How big is the CAN to Ethernet PCB?
The CAN to Ethernet measures 60.3 × 72.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CAN to Ethernet?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CAN to Ethernet design files?
From the RoboJackets/roboracing-electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CAN to Ethernet design in my own project?
The repository has no license, so all rights stay with RoboJackets. Use it as a reference, and ask the author before reusing the design.
