HubBoard
About the HubBoard PCB
HubBoard is an open source PCB design by RobotClubKut, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 50 mm, with 68 components from 28 distinct parts.
Other key parts include the DF3_UART, TA48M05F, NJM2360A, Mini-B and PSOC3_CY8C38_FAMILY_100. By type, the board carries 25 capacitors, 13 ICs, 10 resistors, 8 diodes, 6 connectors and 2 crystals.
It belongs with the robotics & motion designs in this gallery.
From the project
ろぼっとくらぶ りぴ～と
Main components on the HubBoard
HubBoard bill of materials (BOM)
68 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | DF3_UART | DF1E-4P_Streight | U1, U2, U3, U4 |
| 1 | TA48M05F | TO-251 | U5 |
| 1 | NJM2360A | PDIP-8 | U6 |
| 1 | Mini-B | USB_MINI_B_HIROSE | U7 |
| 2 | PSOC3_CY8C38_FAMILY_100 | TQFP-100_14x14mm_Pitch0.5mm | U8, U10 |
| 4 | drill_3mm | dril_3mm | U9, U11, U12, U13 |
| 2 | Crystal | Crystal_HC49-SD_SMD | Y1, Y2 |
| 2 | CONN_WHITE_5 | DF1E-5P_Streight | CN1, CN3 |
| 1 | DF22L-2P | CONN_RED_2P | CN2 |
| 1 | DF22R-2P | CONN_RED_2P | CN4 |
| 2 | CONN_WHITE_3 | DF1E-3P_Streight | CN5, CN6 |
| 1 | 470u | C_Radial_D10_L13_P5 | CP1 |
| 1 | 100u | C_Radial_D10_L13_P5 | CP2 |
| 1 | SLIDE_SW | Toggle_Swith | SW1 |
| 1 | D | Diode_DO-41_SOD81_Vertical_AnodeUp | D1 |
| 1 | LED | LED-3MM | D2 |
| 6 | LED | LED-0603 | D3, D4, D7, D8, D9, D10 |
| 1 | 220u | C_Radial_D10_L20_P5 | L1 |
| 15 | 0.1u | C_0603 | C3, C4, C5, C7, C8, C10, C16, C17 +7 |
| 4 | 1u | C_0805 | C6, C11, C19, C23 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470p | C_Disc_D6_P5 | C9 |
| 4 | 12p | C_0603 | C12, C13, C20, C21 |
| 1 | 33u | C_Radial_D5_L6_P2.5 | C27 |
| 1 | 1k | Resistor_Horizontal_RM10mm | R1 |
| 1 | 6.2k | Resistor_Horizontal_RM10mm | R2 |
| 1 | 0.33 | Resistor_Horizontal_RM10mm | R3 |
| 1 | R | R_0603 | R4 |
| 6 | 1k | R_0603 | R5, R6, R9, R10, R11, R12 |
HubBoard design files
The KiCad project lives in the RobotClubKut/RobotClubRepeat repository on GitHub; these links point at the commit this page was built from.
HubBoard: common questions
How big is the HubBoard PCB?
The HubBoard measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HubBoard?
68 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the HubBoard design files?
From the RobotClubKut/RobotClubRepeat repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the HubBoard design in my own project?
Yes, under the terms of its MIT license, which RobotClubKut chose for the repository.
More boards in RobotClubRepeat
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
11ua
57.3 × 19 mm26 parts2LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979