PCB-wizytowka

robotgtfxry·PCB-wizytowka·hardware/card/card.kicad_pcb

PCB-wizytowka layout, top view — open source RISC-V board by robotgtfxry

About the PCB-wizytowka

PCB-wizytowka is an open source RISC-V PCB design by robotgtfxry, published on GitHub. It is a 2-layer board measuring 85.6 × 54 mm, with 138 components from 8 distinct parts.

Its main chip is the CH32V003F4P6, from the RISC-V family. By type, the board carries 128 diodes, 3 resistors, 2 switches, 2 capacitors, 1 IC and 1 transistor.

From the project

Wizytówka w formacie karty ISO (85.6 × 54 mm, FR4 0.8 mm, czarna matowa maska, ENIG):

Wizytówka w formacie karty ISO (85.6 × 54 mm, FR4 0.8 mm, czarna matowa maska, ENIG):

front: ekran 16 × 8 = 128 diod LED 0603, każda obrócona o 45°, raster 2.54 mm (ekran ok. 40 × 20 mm), oraz 2 super płaskie przyciski (A/B, 3.7 × 3.7 × 0.35 mm), tył: CH32V003F4P6, 3 drabinki rezystorowe 4×33 Ω, kondensatory, P-MOSFET zabezpieczający przed odwrotną baterią, pady pogo SWIO, CR2032 bez żadnego koszyka — trzyma ją widelec z jednym językiem wycięty w samej karcie, tekstura z miedzi: wylewki GND na obu stronach mają wzór Seigaiha (japońskie łuski fal: nakładające się wachlarze koncentrycznych…

PCB-wizytowka, from the project README
From the project README

Main components on the PCB-wizytowka

PCB-wizytowka bill of materials (BOM)

138 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH32V003F4P6
U1
1
AO3401A
Q1
1
CR2032
BT1
2
TL3312
SW1, SW2
128
LED_0603_YG
D1, D2, D3, D4, D5, D6, D7, D8 +120
1
100n
C1
1
22u
C2
3
4x33R
RN1, RN2, RN3

PCB-wizytowka design files

The KiCad project lives in the robotgtfxry/PCB-wizytowka repository on GitHub; these links point at the commit this page was built from.

PCB-wizytowka: common questions

What microcontroller does the PCB-wizytowka use?

The PCB-wizytowka is built around the CH32V003F4P6, from the RISC-V family.

How big is the PCB-wizytowka?

The PCB-wizytowka measures 85.6 × 54 mm, has 2 copper layers and is 0.8 mm thick.

How many components are on the PCB-wizytowka?

138 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB-wizytowka design files?

From the robotgtfxry/PCB-wizytowka repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB-wizytowka design in my own project?

The repository has no license, so all rights stay with robotgtfxry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB-wizytowka without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

Similar boards