Axiom thermocouple

robotical·axiom-thermocouple

Axiom thermocouple PCB layout, top view — open source STM32 board by robotical

About the Axiom thermocouple PCB

Axiom thermocouple is an open source STM32 PCB design by robotical, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 48.5 × 34.6 mm, with 48 components from 16 distinct parts.

Its main chip is the STM32F030K6Tx, from the STM32 family. Other key parts include the MAX31856, AP2112K-3.3 and SK6805-EC15. By type, the board carries 13 diodes, 13 capacitors, 7 resistors, 5 ICs, 4 inductors and 3 transistors.

From the project

Thermocouple amp + microcontroller and JST SH / axiom magnetic connectors

Main components on the Axiom thermocouple

Axiom thermocouple bill of materials (BOM)

48 components, 16 distinct parts.

QtyPartRefs
1
MAX31856
U1
1
STM32F030K6Tx
U2
1
AP2112K-3.3
U3
2
SK6805-EC15
U4, U5
3
Q_NMOS_GSD
Q1, Q2, Q3
1
Screw_Terminal_01x02
J2
2
Conn_01x04
J5, J6
12
ESD5341N-ES
D1, D2, D3, D4, D5, D6, D9, D10 +4
1
NUP2105L
D15
4
600R / 100MHz
FB1, FB2, FB3, FB4
6
0.01uF
C1, C2, C3, C4, C5, C6
4
1uF
C7, C11, C12, C13
2
100nF
C8, C9
1
4.7uF
C10
3
10k
R3, R4, R9
4
3k3
R5, R6, R7, R8

Axiom thermocouple design files

The KiCad project lives in the robotical/axiom-thermocouple repository on GitHub; these links point at the commit this page was built from.

Axiom thermocouple: common questions

What microcontroller does the Axiom thermocouple use?

The Axiom thermocouple is built around the STM32F030K6Tx, from the STM32 family.

How big is the Axiom thermocouple PCB?

The Axiom thermocouple measures 48.5 × 34.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Axiom thermocouple?

48 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Axiom thermocouple design files?

From the robotical/axiom-thermocouple repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Axiom thermocouple design in my own project?

Yes, under the terms of its GPL-3.0 license, which robotical chose for the repository.

Can I test firmware for the Axiom thermocouple without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards