16 open source boards using the MAX31856
Real designs built with the MAX31856, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
KilnHat
tanaes
65 × 49 mm42 parts2LMIT7STM32
Lre avio daq2
IITB-Rocket-Team-Avionics
4.5 × 13.4 mm136 parts2LMIT4ESP8266
ReflowOven
hjf
58.4 × 101.6 mm45 parts2LMIT4NXP
Caelus
CaelusRocketry
247.7 × 178.4 mm89 parts2LNo license1Calcifer
lowdrant
65 × 56 mm32 parts2LGPL-3.01ESP32
Ricardo-Stark
icl-rocketry
117 × 49 mm298 parts6LNo license0ESP32
Ricardo-Kermit
icl-rocketry
85 × 43 mm194 parts4LMIT0STM32
APRL-ThermoComm-HW
npgo22
97 × 97 mm117 parts4LNo license0Pulse Gen daughter
rafal-zasada
72.3 × 104.7 mm97 parts4LNo license0STM32
Avionics-Andromeda
StudentOrganisationForAerospaceResearch
50 × 70 mm86 parts4LNo license0STM32
Axiom thermocouple
robotical
48.5 × 34.6 mm48 parts2LGPL-3.00NXP
Old
CaelusRocketry
9.1 × 65.5 mm85 parts2LNo license1STM32
Thermocouple Board
npgo22
97 × 97 mm117 parts4LNo license0AVR/Arduino
Valhalla UFH Sensor (SMT)
csdexter
99.6 × 64.3 mm53 parts2LGPL-3.00STM32
Thermocouple Board
npgo22
97 × 97.1 mm117 parts4LNo license0STM32
TC DAQ
npgo22
86 × 60 mm99 parts4LNo license0
How designs wire the MAX31856
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the MAX31856 connects to, and the resistors, capacitors and other passives placed on it.
- The T- pin has a series capacitor on 13 of 14 designs, most often 100 nF (then 10 nF).
- The T+ pin has a series capacitor on 13 of 14 designs, most often 100 nF (then 10 nF).
- The T- pin has a capacitor to GND on 12 of 14 designs, most often 10 nF.
- The T+ pin has a capacitor to GND on 12 of 14 designs, most often 10 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| AGNDpin 1 | Connected to: GND 86% | — |
| BIASpin 2 | Connected to: A connector 79% |
|
| T-pin 3 | Connected to: A connector 36% |
|
| T+pin 4 | Connected to: A connector 36% |
|
| AVDDpin 5 | Connected to: 3.3V 79% · a signal 21% |
|
| DNCpin 6 | Connected to: Not connected 93% | — |
| DVDDpin 8 | Connected to: 3.3V 86% |
|
| CSpin 9 | Connected to: The microcontroller 64% |
|
| DGNDpin 14 | Connected to: GND 92% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include KilnHat by tanaes, ReflowOven by hjf, Lre avio daq2 by IITB-Rocket-Team-Avionics and CaelusPCB by CaelusRocketry.
The MAX31856 in open source designs
The gallery holds 16 open source boards using the MAX31856 from 14 GitHub repositories; a typical one measures about 78.6 × 64.9 mm and carries around 93 components.
50% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is KilnHat by tanaes.
Parts used alongside the MAX31856
Microcontrollers on boards using the MAX31856
What boards using the MAX31856 are built for
MAX31856: common questions
Where can I find a MAX31856 reference design?
Each of the 16 boards on this page is a real design using the MAX31856. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX31856 T- pin connected?
The T- pin has a series capacitor on 13 of 14 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 14 open source designs using the MAX31856.
How is the MAX31856 T+ pin connected?
The T+ pin has a series capacitor on 13 of 14 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 14 open source designs using the MAX31856.
What decoupling capacitors do designs use on the MAX31856 AVDD pin?
The AVDD pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 14 open source designs using the MAX31856.
What parts are used alongside the MAX31856?
The AP2112K-3.3, LAN8742A, SN65HVD230, STM32H563RITx and TJA1042T-3 appear in the most repositories here.
Which microcontrollers do boards using the MAX31856 use?
Most are built on STM32 (7), ESP32 (2), NXP (2) and AVR/Arduino (1).
How big is a typical board using the MAX31856?
The median is 78.6 × 64.9 mm, and 50% are two-layer designs.
What is the most popular open source board using the MAX31856?
By GitHub stars, KilnHat by tanaes, with 7 stars.
Can I simulate one of these boards using the MAX31856 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.