11 open source boards using the STM32F030K6Tx

Real designs built with the STM32F030K6Tx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the STM32F030K6Tx

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the STM32F030K6Tx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 4.7 µF).
  • The VDDA pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF).
  • The BOOT0 pin has a resistor to GND on 7 of 10 designs, most often 10 kΩ (then 13 kΩ).
  • The PF0 pin has a crystal on 6 of 10 designs, most often 32 MHz (then 8 MHz).
VDDpin 1, 17Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 90% · 100 nF (13), 4.7 µF (3), 1 µF (2)
PF0pin 2Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 32 MHz (2), 8 MHz (2), 12 MHz (1)
  • Capacitor to GND on 60% · 20 pF (3), 22 pF (1)
PF1pin 3Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 32 MHz (2), 8 MHz (2), 12 MHz (1)
  • Capacitor to GND on 60% · 20 pF (3), 22 pF (1)
NRSTpin 4Connected to: A connector 50% · not connected 20%
  • Capacitor to GND on 50% · 100 nF (5)
  • Pull-up to 3.3V on 40% · 10 kΩ (4)
VDDApin 5Connected to: 3.3V 70% · a signal 30%
  • Decoupling capacitor on 70% · 100 nF (5), 1 µF (4), 10 nF (4)
PA0pin 6Connected to: A connector 30% · not connected 20%
  • Series resistor on 30% · 10 kΩ (1), 1.5 kΩ (1), 2.7 kΩ (1)
PA1pin 7Connected to: A connector 20%
  • Series resistor on 30% · 10 kΩ (1), 1 kΩ (1), 150 Ω (1)
PA4pin 10Connected to: A connector 30%
  • Series resistor on 30% · 1 kΩ (3)
PA6pin 12Connected to: A connector 20% · not connected 30%
  • Series resistor on 30% · 270 Ω (2), 1 kΩ (1), 22 Ω (1)
VSSpin 16, 32Connected to: GND 90%
PA9pin 19Connected to: A connector 40%
  • Series resistor on 30% · 1 kΩ (2), 3 kΩ (1)
PA10pin 20Connected to: A connector 40%
  • Series resistor on 30% · 1 kΩ (2), 10 Ω (1)
PB4pin 27Connected to: A connector 30% · not connected 40%
  • Series resistor on 30% · 13 kΩ (1), 1 kΩ (1), 22 Ω (1)
PB5pin 28Connected to: A connector 40% · not connected 30%
  • Series resistor on 30% · 1 kΩ (1), 13 kΩ (1), 22 Ω (1)
PB7pin 30Connected to: A connector 50%
  • Series resistor on 30% · 1 kΩ (1), 100 Ω (1), 22 Ω (1)
BOOT0pin 31Connected to: Signal 80%
  • Resistor to GND on 70% · 10 kΩ (6), 13 kΩ (1)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESC-Hardware by cveliz, Nanook mb by burgrp, Mini df player by Chirag-Vadrali and Protocol Analyzer by Sidharth-Saji.

The STM32F030K6Tx in open source designs

The gallery holds 11 open source boards using the STM32F030K6Tx from 10 GitHub repositories; a typical one measures about 69 × 45 mm and carries around 60 components.

73% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.

The most starred is ESC-Hardware by cveliz.

Parts used alongside the STM32F030K6Tx

Microcontrollers on boards using the STM32F030K6Tx

STM32F030K6Tx: common questions

Where can I find a STM32F030K6Tx reference design?

Each of the 11 boards on this page is a real design using the STM32F030K6Tx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F030K6Tx VDD pin?

The VDD pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F030K6Tx.

What decoupling capacitors do designs use on the STM32F030K6Tx VDDA pin?

The VDDA pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F030K6Tx.

What resistor goes on the STM32F030K6Tx BOOT0 pin?

The BOOT0 pin has a resistor to GND on 7 of 10 designs, most often 10 kΩ (then 13 kΩ). Counted from the KiCad layouts of 10 open source designs using the STM32F030K6Tx.

Which microcontrollers do boards using the STM32F030K6Tx use?

Most are built on STM32 (11).

How big is a typical board using the STM32F030K6Tx?

The median is 69 × 45 mm, and 73% are two-layer designs.

What is the most popular open source board using the STM32F030K6Tx?

By GitHub stars, ESC-Hardware by cveliz, with 3 stars.

Can I simulate one of these boards using the STM32F030K6Tx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part