Darkroom tracker
Roboy·darkroom_tracker
About the Darkroom tracker PCB
Darkroom tracker is an open source PCB design by Roboy, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 31.8 × 56 mm, with 33 components from 29 distinct parts.
Other key parts include the NINA-W102, LD39200 and BNO055. By type, the board carries 14 connectors, 6 capacitors, 4 resistors, 3 ICs, 2 switches and 1 diode.
From the project
pcb for lighthouse tracking
Main components on the Darkroom tracker
Darkroom tracker bill of materials (BOM)
33 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NINA-W102 | XCVR_NINA-W102 | U1 |
| 1 | LD39200 | DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U2 |
| 1 | BNO055 | LGA-28_5.2x3.8mm_P0.5mm | U3 |
| 1 | UART | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J1 |
| 1 | TinyFPGA-left | PinSocket_1x15_P2.54mm_Vertical | J2 |
| 1 | TinyFPGA-right | PinSocket_1x15_P2.54mm_Vertical | J3 |
| 1 | sensor0 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J4 |
| 1 | sensor1 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J5 |
| 1 | sensor2 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J6 |
| 1 | sensor3 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J7 |
| 1 | sensor4 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J8 |
| 1 | sensor5 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J9 |
| 1 | sensor6 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J10 |
| 1 | sensor7 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J11 |
| 1 | sensor8 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J12 |
| 1 | sensor9 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J13 |
| 1 | sensor10 | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J14 |
| 1 | Fiducial | R1_ear_silk_5.5mm | FID1 |
| 1 | Fiducial | R1_eyes_mask_5.5mm | FID2 |
| 1 | Fiducial | R1_face_mask_5.5mm | FID3 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RESET | SW_SPST_KXT3 | SW1 |
| 1 | BOOT | SW_SPST_KXT3 | SW2 |
| 1 | LED | LED_0402_1005Metric | D1 |
| 2 | 10u | C_0402_1005Metric | C1, C4 |
| 2 | 0.1u | C_0402_1005Metric | C2, C6 |
| 1 | 6.8n | C_0402_1005Metric | C3 |
| 1 | 120n | C_0402_1005Metric | C5 |
| 1 | 1k | R_0402_1005Metric | R1 |
| 3 | 10k | R_0402_1005Metric | R2, R3, R4 |
Darkroom tracker design files
The KiCad project lives in the Roboy/darkroom_tracker repository on GitHub; these links point at the commit this page was built from.
Darkroom tracker: common questions
How big is the Darkroom tracker PCB?
The Darkroom tracker measures 31.8 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Darkroom tracker?
33 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Darkroom tracker design files?
From the Roboy/darkroom_tracker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Darkroom tracker design in my own project?
Yes, under the terms of its BSD-3-Clause license, which Roboy chose for the repository.