85 open source boards using the BNO055
Real designs built with the BNO055, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Orion - Control Board
AshishA26
70 × 82.4 mm69 parts2LNo license253PiFinder4
brickbots
98 × 75 mm150 parts4LGPL-3.0250AVR/Arduino
Miniscope v4-Rigid-Flex
Aharoni-Lab
30 × 57.3 mm109 parts6LGPL-3.0161NXP
Kbox hardware
sarfata
100 × 54 mm102 parts2LNo license19Miniscope-LFOV
Aharoni-Lab
36.7 × 63.1 mm101 parts6LGPL-3.018Kicad LFOV RigidFlex Assembly Screwhole
Aharoni-Lab
19 × 12.5 mm97 parts4LNo license8STM32
OpenWave
wattnotions
40 × 40 mm51 parts2LNo license8Power Unit - CanSat 2023
Project-SkyFall
60.7 × 61.3 mm153 parts4LNo license6ESP32
NHK 2024 R2 MD mother
ararobo
100 × 60 mm209 parts4LMIT5ESP32
SUMEC MK V Pro
bismarx-v1
97 × 37.5 mm120 parts4LNo license3NXP
Salus
Wetmelon
102.9 × 33 mm62 parts2LGPL-3.03- schematic only · 9 parts
LoRa-Based-RTK
tolgaSelimoglu
9 partsNo license3 - schematic only · 4 partsNXP
Cycloidal-Actuator-Design-Project
ratdo6
4 partsNo license3 ESP32
RGB-LED-Pendant
mjhaahr
75 × 70 mm235 parts4LMIT2ESP32
Core System 2026
MarsRoverUdeGSpace
78 × 53 mm78 parts4LMIT2NXP
MAIN
MelissaKt
119.7 × 117.6 mm35 parts4LNo license2STM32
Mother Ctrl
Tomoshibi-technology
100 × 60 mm248 parts2LMIT1ESP32
MADHEX-v2
DEFOR111
53 × 85 mm75 parts4LNo license1Microchip SAM
AvionicsBoard
djmallek
157.4 × 59 mm70 parts2LNo license1STM32
RoboRyo
KaitoTLex
64.3 × 115.8 mm68 parts4LMIT1ESP8266
Roboy sno
Roboy
65.5 × 36.1 mm58 parts4LBSD-3-Clause1Nordic nRF
Updog
stevenpetryk
22.9 × 62.2 mm46 parts4LNo license1NXP
INSPACe-CanSat-Team-Tejas-PCB-Design
Rujul-Rumale
101.9 × 101.9 mm34 parts2LCERN-OHL-S-2.01Flight computer
unl-rocketry
27 × 60 mm32 parts2LCERN-OHL-S-2.01Flipper thermal camera
Badbird5907
67 × 25.3 mm26 parts2LNo license1Adafruit BNO055 STEMMA QT
ShekharShwetank
25.4 × 20.3 mm24 parts2LMIT1ESP32
TrailCurrentPlateau
trailcurrentoss
68.1 × 57.9 mm16 parts2LMIT1- schematic only · 33 partsRP2040/RP2350
Pico pilot
DusterTheFirst
33 partsGPL-3.01 Raspberry Pi
ORCA CORE
UEC-RMF-Rescue
99 × 94 mm182 parts2LNo license0ESP32
Micromouse
MukeshSethy
100 × 120 mm177 parts4LNo license0Raspberry Pi
Piridium bus
Alan-JH
90.2 × 95.9 mm156 parts4LCC-BY-NC-4.00ESP32
SmallKat CM4
keionbis
100 × 56 mm152 parts4LNo license0STM32
DataAcq-Sunlight
lhr-solar
95 × 82 mm142 parts2LNo license0Quack core
HeyPCB
101 × 51.5 mm126 parts4LCERN-OHL-S-2.00STM32
ElectronyConstructor
BaktiyarBr
203.2 × 100.1 mm123 parts4LNo license0Nordic nRF
NRF dev board
EmielV2002
122.1 × 104.4 mm104 parts4LGPL-3.00
How designs wire the BNO055
Read from the KiCad layouts of 64 open source designs, one per repository: what each pin of the BNO055 connects to, and the resistors, capacitors and other passives placed on it.
- The CAP pin has a capacitor to GND on 52 of 58 designs, most often 100 nF (then 1 µF).
- The PIN8 pin is left unconnected on 58 of 62 designs (2.8V on 2, a signal on 2).
- The PIN7 pin is left unconnected on 55 of 62 designs (GND on 6).
- The PIN1 pin is left unconnected on 54 of 63 designs (3.3V on 9).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PIN1pin 1 | Connected to: Not connected 86% | — |
| GNDpin 2 | Connected to: GND 91% | — |
| VDDpin 3 | Connected to: 3.3V 80% |
|
| BOOT_LOAD_PINpin 4 | Connected to: Signal 60% · 3.3V 35% |
|
| PIN7pin 7 | Connected to: Not connected 89% | — |
| PIN8pin 8 | Connected to: Not connected 94% | — |
| CAPpin 9 | Connected to: Signal 91% |
|
| BL_INDpin 10 | Connected to: Not connected 66% · GND 29% | — |
| RESETpin 11 | Connected to: The microcontroller 25% |
|
| PIN12pin 12 | Connected to: Not connected 100% | — |
| PIN13pin 13 | Connected to: Not connected 100% | — |
| GNDIOpin 15, 16, 25 | Connected to: GND 68% · not connected 30% | — |
| COM3pin 17 | Connected to: GND 56% · a signal 38% |
|
| COM2pin 18 | Connected to: GND 96% | — |
| COM1pin 19 | Connected to: The microcontroller 66%, a connector 26% |
|
| COM0pin 20 | Connected to: The microcontroller 64%, a connector 25% |
|
| PIN21pin 21 | Connected to: Not connected 100% | — |
| PIN22pin 22 | Connected to: Not connected 100% | — |
| PIN23pin 23 | Connected to: Not connected 100% | — |
| PIN24pin 24 | Connected to: Not connected 100% | — |
| XOUT32pin 26 | Connected to: Signal 56% · not connected 44% |
|
| XIN32pin 27 | Connected to: Signal 56% · not connected 44% |
|
| VDDIOpin 28 | Connected to: 3.3V 92% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Orion - Control Board by AshishA26, PiFinder4 by brickbots, Miniscope v4-Rigid-Flex by Aharoni-Lab and Kbox hardware by sarfata.
The BNO055 in open source designs
The gallery holds 85 open source boards using the BNO055 from 67 GitHub repositories; a typical one measures about 69 × 59.5 mm and carries around 62 components.
57% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Orion - Control Board by AshishA26.
Parts used alongside the BNO055
Microcontrollers on boards using the BNO055
What boards using the BNO055 are built for
BNO055: common questions
Where can I find a BNO055 reference design?
Each of the 85 boards on this page is a real design using the BNO055. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BNO055 CAP pin connected?
The CAP pin has a capacitor to GND on 52 of 58 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 64 open source designs using the BNO055.
How is the BNO055 PIN8 pin connected?
The PIN8 pin is left unconnected on 58 of 62 designs (2.8V on 2, a signal on 2). Counted from the KiCad layouts of 64 open source designs using the BNO055.
How is the BNO055 PIN7 pin connected?
The PIN7 pin is left unconnected on 55 of 62 designs (GND on 6). Counted from the KiCad layouts of 64 open source designs using the BNO055.
What parts are used alongside the BNO055?
The BMP280, USBLC6-2SC6, AMS1117-3.3, BME280 and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do boards using the BNO055 use?
Most are built on ESP32 (19), STM32 (14), NXP (7) and AVR/Arduino (5).
How big is a typical board using the BNO055?
The median is 69 × 59.5 mm, and 57% are two-layer designs.
What is the most popular open source board using the BNO055?
By GitHub stars, Orion - Control Board by AshishA26, with 253 stars.
Can I simulate one of these boards using the BNO055 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.