3 open source boards using the LD39200

Real designs built with the LD39200, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LD39200 in open source designs

The gallery holds 3 open source boards using the LD39200 from 3 GitHub repositories; a typical one measures about 65.5 × 56 mm and carries around 58 components.

50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is LimeRFE by myriadrf.

Parts used alongside the LD39200

Microcontrollers on boards using the LD39200

LD39200: common questions

Where can I find a LD39200 reference design?

Each of the 3 boards on this page is a real design using the LD39200. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LD39200 use?

Most are built on AVR/Arduino (1) and ESP8266 (1).

How big is a typical board using the LD39200?

The median is 65.5 × 56 mm, and 50% are two-layer designs.

What is the most popular open source board using the LD39200?

By GitHub stars, LimeRFE by myriadrf, with 28 stars.

Can I simulate one of these boards using the LD39200 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part