Tinyups
rocketpie·tinyups·hardware/tinyups.kicad_pcb
About the Tinyups PCB
Tinyups is an open source RP2040/RP2350 PCB design by rocketpie, published on GitHub under the MIT license. It is a 4-layer board measuring 150 × 140 mm, with 124 components from 52 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family.
It belongs with the power & battery designs in this gallery.
From the project
like a laptop battery, but for PCs
The schematic and the board are maintained as KiCad files. There is no schematic/board generator: the board is placed and tuned by hand in the interactive placement UI, then checked with the tools below.
tinyups.kicadpcb` is the full 124-part design, 150 × 140 mm, 4 layers:
- Stackup: F.Cu (power pours + signals) / In1.Cu = solid GND plane / In2.Cu = signal / B.Cu = signal. - Placement: the try5 hand-tuned placement (see ui/placement/placements/try5.json). - Power: high-current rails are copper pours on F.Cu, not signal traces (ADR-0008). hardware/pourpower.py builds the corridors; the…
Tinyups bill of materials (BOM)
124 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TBD | C_0805_2012Metric | 1C1 |
| 1 | SMBJ15A | D_SMB | 1D1 |
| 1 | 25A | Fuse_Blade_ATO_directSolder | 1F1 |
| 1 | XT60 | SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm | 1J1 |
| 4 | NTMFS5C410N | VSONP-8-1EP_5x6_P1.27mm | 1Q1, 3Q1, 4Q1, 4Q2 |
| 1 | 2.2m | R_Shunt_Vishay_WSR2_WSR3 | 1R1 |
| 1 | TBD-UV-hi | R_0805_2012Metric | 1R2 |
| 1 | TBD-UV-lo | R_0805_2012Metric | 1R3 |
| 1 | TBD-OV-hi | R_0805_2012Metric | 1R4 |
| 1 | TBD-OV-lo | R_0805_2012Metric | 1R5 |
| 1 | TBD-PWR | R_0805_2012Metric | 1R6 |
| 1 | 100k-PGD | R_0805_2012Metric | 1R7 |
| 1 | LM5069 | VSSOP-10_3x3mm_P0.5mm | 1U1 |
| 2 | 47n | C_0805_2012Metric | 2C1, 2C2 |
| 8 | 1u | C_0805_2012Metric | 2C3, 2C4, 4C1, 4C2, 4C3, 4C4, 5C8, 6C5 |
| 2 | 10n | C_0805_2012Metric | 2C5, 5C4 |
| 4 | 1n | C_0805_2012Metric | 2C6, 5C5, 5C6, 5C7 |
| 12 | 100n | C_0805_2012Metric | 2C7, 2C8, 2C9, 3C1, 4C5, 4C6, 4C7, 4C8 +4 |
| 1 | 2.2u | L_12x12mm_H8mm | 2L1 |
| 4 | NTMFS4C01N | VSONP-8-1EP_5x6_P1.27mm | 2Q1, 2Q2, 2Q3, 2Q4 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5m | R_Shunt_Vishay_WSR2_WSR3 | 2R1, 2R2 |
| 10 | 100k | R_0805_2012Metric | 2R3, 2R4, 3R1, 4R5, 4R6, 4R7, 4R8, 5R1 +2 |
| 11 | 10k | R_0805_2012Metric | 2R5, 2R6, 2R7, 2R8, 2R9, 2R10, 2R11, 2R12 +3 |
| 1 | BQ25720 | QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | 2U1 |
| 2 | 470u | CP_Elec_8x10 | 3C2, 3C3 |
| 1 | LM74700-Q1 | SOT-23-6 | 3U1 |
| 1 | PACK | SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm | 4J6 |
| 1 | CELLS | PinHeader_1x05_P2.54mm_Vertical | 4J7 |
| 2 | 1m | R_Shunt_Vishay_WSR2_WSR3 | 4R1, 5R3 |
| 3 | 10k-NTC | R_0805_2012Metric | 4R2, 4R3, 4R4 |
| 5 | 100 | R_0805_2012Metric | 4R9, 4R10, 4R11, 4R12, 4R13 |
| 1 | BQ76942 | TQFP-48_7x7mm_P0.5mm | 4U1 |
| 4 | 10u | C_0805_2012Metric | 5C1, 5C10, 6C3, 6C4 |
| 1 | 220u | CP_Elec_8x10 | 5C9 |
| 1 | XT30 | SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | 5J2 |
| 1 | 1u0 | L_12x12mm_H8mm | 5L1 |
| 4 | NTMFS5C430N | VSONP-8-1EP_5x6_P1.27mm | 5Q1, 5Q2, 5Q3, 5Q4 |
| 1 | 7k15 | R_0805_2012Metric | 5R2 |
| 1 | 27k | R_0805_2012Metric | 5R4 |
| 1 | 93k1 | R_0805_2012Metric | 5R5 |
| 1 | LM5176 | QFN-28-1EP_4x4mm_P0.4mm_EP2.4x2.4mm | 5U1 |
| 2 | 20p | C_0805_2012Metric | 6C1, 6C2 |
| 1 | USB | PinHeader_1x03_P2.54mm_Vertical | 6J3 |
| 1 | SWD | PinHeader_1x03_P2.54mm_Vertical | 6J4 |
| 1 | FAN | PinHeader_1x04_P2.54mm_Vertical | 6J5 |
| 5 | 1k | R_0805_2012Metric | 6R1, 6R2, 6R3, 6R4, 6R5 |
| 2 | 27 | R_0805_2012Metric | 6R6, 6R7 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | 6U1 |
| 1 | W25Q128 | SOIC-8_3.9x4.9mm_P1.27mm | 6U2 |
| 1 | 3V3 | SOT-23-5 | 6U3 |
| 1 | 12MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | 6Y1 |
| 4 | LED | LED_0805_2012Metric | 6D1, 6D2, 6D3, 6D4 |
Tinyups design files
The KiCad project lives in the rocketpie/tinyups repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/tinyups.kicad_pcb
- Schematichardware/tinyups.kicad_sch
- BOMdocs/bom.md
Tinyups: common questions
What microcontroller does the Tinyups use?
The Tinyups is built around the RP2040, from the RP2040/RP2350 family.
How big is the Tinyups PCB?
The Tinyups measures 150 × 140 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tinyups?
124 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tinyups design files?
From the rocketpie/tinyups repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tinyups design in my own project?
Yes, under the terms of its MIT license, which rocketpie chose for the repository.
Can I test firmware for the Tinyups without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k