First

Roguillo·projects·dice_temphumid_rng_pcb/dice_temphumid_rng_pcb_kicad/first_pcb.kicad_pcb

First PCB layout, top view — open source AVR/Arduino board by Roguillo

About the First PCB

First is an open source AVR/Arduino PCB design by Roguillo, published on GitHub under the MIT license. It is a 2-layer board measuring 102 × 40 mm, with 49 components from 25 distinct parts.

Its main chip is the TB6612FNG, from the AVR/Arduino family. Other key parts include the AOZ2262NQI-11. By type, the board carries 16 diodes, 15 resistors, 6 capacitors, 3 transistors, 3 connectors and 2 ICs.

Main components on the First

TB6612FNGAOZ2262NQI-11

First bill of materials (BOM)

49 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TB6612FNG
ATmega32U4-A
U1
1
AOZ2262NQI-11
DHT11
U3
3
T2N7002AK
Q1, Q2, Q3
1
16MHz
Y1
1
Conn_01x10
J1
1
ICSP
J3
1
USB_B_Micro
J4
1
Jumper_2_Open
JP1
1
~
SW1
1
LDT-N2804RI
LED1
1
1N5820
TX
D1
1
RX
D2
14
SK6812MINI
D3, D4, D5, D6, D7, D8, D9, D10 +6
1
0.1UF
100uF
C1
1
10UF
1uF
C2
1
0.1UF
22pF
C3
1
10UF
22pF
C4
1
470UF
0.1uF
C5
1
1UF
1uF
C6
2
100
R1, R2
Show 5 more
QtyPartRefs
2
22
R3, R4
1
10k
R5
1
470
R6
1
5k
R7
8
150
R8, R9, R10, R11, R12, R13, R14, R15

First design files

The KiCad project lives in the Roguillo/projects repository on GitHub; these links point at the commit this page was built from.

First: common questions

What microcontroller does the First use?

The First is built around the TB6612FNG, from the AVR/Arduino family.

How big is the First PCB?

The First measures 102 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the First?

49 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the First design files?

From the Roguillo/projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the First design in my own project?

Yes, under the terms of its MIT license, which Roguillo chose for the repository.

Can I test firmware for the First without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in projects

Similar boards