USB to UART converter with module
About the USB to UART converter with module
USB to UART converter with module is an open source PCB design by RomLab, published on GitHub. It is a 2-layer board measuring 23.5 × 41.9 mm, with 9 components from 6 distinct parts.
By type, the board carries 3 connectors, 2 transistors, 2 diodes and 2 resistors.
It belongs with the iot & wireless and usb & debug tools designs in this gallery.
From the project
PCB for underfloor heating system
There are here schematics, PCBs, 3D views and Gerber data for devices in underfloor heating system. There are two types folders with version KiCAD 5 and KiCAD 7. The libraries are here.
More information at https://github.com/RomLab/system-for-underfloor-heating-v2.0
USB to UART converter with module bill of materials (BOM)
9 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MMBT2222 | sot_23_3 | Q1, Q2 |
| 2 | DS1023-1-10S21 | 1x10_pin_socket_2.54mm_vertical_8.5mm | P1, P2 |
| 1 | 2x3_MLW06A | 2x3_MLW06A | P3 |
| 1 | SD05-7 | sod_323 | D1 |
| 1 | PHDMI2AB4Z | dfn_2510a_10 | D2 |
| 2 | 10k | r_0805 | R1, R2 |
USB to UART converter with module design files
The KiCad project lives in the RomLab/pcb-system-for-underfloor-heating-v2.0 repository on GitHub; these links point at the commit this page was built from.
USB to UART converter with module: common questions
How big is the USB to UART converter with module?
The USB to UART converter with module measures 23.5 × 41.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB to UART converter with module?
9 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB to UART converter with module design files?
From the RomLab/pcb-system-for-underfloor-heating-v2.0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB to UART converter with module design in my own project?
The repository has no license, so all rights stay with RomLab. Use it as a reference, and ask the author before reusing the design.
More boards in pcb-system-for-underfloor-heating-v2.0
Raspberry PiCentral control unit
255.9 × 224.5 mm735 parts4LNo license1
Zone controller
190 × 153.2 mm422 parts2LNo license1
ESP32Wall mounted room temperature sensor
107 × 90 mm153 parts2LNo license1
Signalization by fireplace
129.8 × 92.5 mm104 parts2LNo license1
Switches with lcd display
115 × 85 mm76 parts2LNo license1
ESP32Wall mounted room temperature sensor - Wifi
107 × 90 mm50 parts2LNo license1
Testing board
31.1 × 73 mm37 parts2LNo license1
Hub 1-Wire bus
48.3 × 45.7 mm20 parts2LNo license1
Connection connector 1-Wire bus
36.2 × 33.7 mm10 parts2LNo license1
Similar boards
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703
XG Station Power
54.3 × 91 mm9 parts2LCC-BY-4.0703
L0 Dynamixel
Luos-io
20.3 × 15.2 mm15 parts2LMIT547
L0 stepper driver
20.3 × 15.2 mm18 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547