R60
rpedde·r60
About the R60 PCB
R60 is an open source AVR/Arduino PCB design by rpedde, published on GitHub. It is a 2-layer board measuring 285.8 × 95.3 mm, with 142 components from 73 distinct parts.
Its main chip is the ATmega32U4-AU, from the AVR/Arduino family. By type, the board carries 63 relays, 63 diodes, 8 capacitors, 4 resistors, 1 IC and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
Yet another 60% keyboard. This one is mine.
Seems like all the cool kids are making their own keyboards, this one is mine. Hopefully this makes me cool.
Like most, it's a 16MHz Atmega32U4 running the quantum mechanical keyboard firmware.
This is a 60% keyboard, and I am trying to make it fit in generic 60% cases like the poker case or the WASD Code-61 case (which is nice and heavy -- I like it quite a bit).

Main components on the R60
R60 bill of materials (BOM)
142 components, 73 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-AU | TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | 16MHz | Crystal_SMD_3225-4pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | USB_B | USB_Mini-B | P1 |
| 1 | K_ESC | CHERRY_PCB_100H | K0 |
| 1 | K_0 | CHERRY_PCB_100H | K0A1 |
| 1 | K_MIN | CHERRY_PCB_100H | K0B1 |
| 1 | K_EQL | CHERRY_PCB_100H | K0C1 |
| 1 | K_BS | CHERRY_PCB_200H | K0D1 |
| 1 | K_1 | CHERRY_PCB_100H | K1 |
| 1 | K_P | CHERRY_PCB_100H | K1A1 |
| 1 | K_OBR | CHERRY_PCB_100H | K1B1 |
| 1 | K_CBR | CHERRY_PCB_100H | K1C1 |
| 1 | K_BSL | CHERRY_PCB_150H | K1D1 |
| 1 | K_2 | CHERRY_PCB_100H | K2 |
| 1 | K_COL | CHERRY_PCB_100H | K2A1 |
| 1 | K_QOT | CHERRY_PCB_100H | K2B1 |
| 1 | K_ENT | CHERRY_PCB_225H | K2C1 |
| 1 | K_3 | CHERRY_PCB_100H | K3 |
| 1 | K_QUE | CHERRY_PCB_100H | K3A1 |
| 1 | K_RSH | CHERRY_PLATE_175H | K3B1 |
Show 53 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | K_4 | CHERRY_PCB_100H | K4 |
| 1 | K_UP | CHERRY_PCB_100H | K4A1 |
| 1 | K_DWN | CHERRY_PCB_100H | K4B1 |
| 1 | K_5 | CHERRY_PCB_100H | K5 |
| 1 | K_6 | CHERRY_PCB_100H | K6 |
| 1 | K_7 | CHERRY_PCB_100H | K7 |
| 1 | K_8 | CHERRY_PCB_100H | K8 |
| 1 | K_9 | CHERRY_PCB_100H | K9 |
| 1 | K_TAB | CHERRY_PLATE_150H | K10 |
| 1 | K_Q | CHERRY_PCB_100H | K11 |
| 1 | K_W | CHERRY_PCB_100H | K12 |
| 1 | K_E | CHERRY_PCB_100H | K13 |
| 1 | K_R | CHERRY_PCB_100H | K14 |
| 1 | K_T | CHERRY_PCB_100H | K15 |
| 1 | K_Y | CHERRY_PCB_100H | K16 |
| 1 | K_U | CHERRY_PCB_100H | K17 |
| 1 | K_I | CHERRY_PCB_100H | K18 |
| 1 | K_O | CHERRY_PCB_100H | K19 |
| 1 | K_CAP | CHERRY_PCB_175H | K20 |
| 1 | K_A | CHERRY_PCB_100H | K21 |
| 1 | K_S | CHERRY_PCB_100H | K22 |
| 1 | K_D | CHERRY_PCB_100H | K23 |
| 1 | K_F | CHERRY_PCB_100H | K24 |
| 1 | K_G | CHERRY_PCB_100H | K25 |
| 1 | K_H | CHERRY_PCB_100H | K26 |
| 1 | K_J | CHERRY_PCB_100H | K27 |
| 1 | K_K | CHERRY_PCB_100H | K28 |
| 1 | K_L | CHERRY_PCB_100H | K29 |
| 1 | K_LSH | CHERRY_PCB_125H | K30 |
| 1 | K_Z | CHERRY_PCB_100H | K31 |
| 1 | K_X | CHERRY_PCB_100H | K32 |
| 1 | K_C | CHERRY_PCB_100H | K33 |
| 1 | K_V | CHERRY_PCB_100H | K34 |
| 1 | K_B | CHERRY_PCB_100H | K35 |
| 1 | K_N | CHERRY_PCB_100H | K36 |
| 1 | K_M | CHERRY_PCB_100H | K37 |
| 1 | K_COM | CHERRY_PCB_100H | K38 |
| 1 | K_DOT | CHERRY_PCB_100H | K39 |
| 1 | K_LCL | CHERRY_PCB_125H | K40 |
| 1 | K_LWN | CHERRY_PCB_125H | K41 |
| 1 | K_LAL | CHERRY_PCB_125H | K42 |
| 1 | K_LSP | CHERRY_PCB_200H | K44 |
| 1 | K_RSP | CHERRY_PCB_200H | K45 |
| 1 | K_RAL | CHERRY_PCB_125H | K47 |
| 1 | K_LFT | CHERRY_PCB_100H | K48 |
| 1 | K_RT | CHERRY_PCB_100H | K49 |
| 1 | SW_Push | SW_SPST_TL3342 | SW1 |
| 63 | D | D_0805 | D0, D0A1, D0B1, D0C1, D0D1, D1, D1A1, D1B1 +55 |
| 2 | 18pF | C_0805_HandSoldering | C1, C2 |
| 5 | .1uF | C_0805_HandSoldering | C3, C4, C5, C6, C7 |
| 1 | 1uF | C_0805_HandSoldering | C8 |
| 2 | 22 | R_0805_HandSoldering | R1, R2 |
| 2 | 10K | R_0805_HandSoldering | R3, R4 |
R60 design files
The KiCad project lives in the rpedde/r60 repository on GitHub; these links point at the commit this page was built from.
- Layoutr60.kicad_pcb
R60: common questions
What microcontroller does the R60 use?
The R60 is built around the ATmega32U4-AU, from the AVR/Arduino family.
How big is the R60 PCB?
The R60 measures 285.8 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the R60?
142 components, from 73 distinct parts. The full bill of materials is listed on this page.
Where can I download the R60 design files?
From the rpedde/r60 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the R60 design in my own project?
The repository has no license, so all rights stay with rpedde. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the R60 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k